S2R/S4R CNC billet adjustable rearsets.

Darren69 · 18-03-2020, 04:38 PM

I have these for sale as they were stated as for the S4 but won't fit without much hassle as they are really for the S2R/S4R style bike.

They are brand new and never fitted but of unknown origin.

I suspect they from far east but lovely quality and material all the same and much better than I have seen previously. I would gladly have them on my own bike.

£75.00 plus post.

350TSS · 18-03-2020, 05:24 PM

They do look nice and a good price too - tempted for my S4 - what makes them a hassle to fit?

Darren69 · 18-03-2020, 05:32 PM

I've not investigated fully but from what I can see they bolt to the engine lower crankcase and swingarm axle on the S4R/S2R style bikes instead of the frame like on the S4 and earlier Monsters, so you would probably need to buy some extra Ducati S4R/S2R parts of fab your own. I didn't check out the details beforehand so I don't know how much exactly that would cost, but even so they are really nice and could be worth the effort.

Darren69 · 18-03-2020, 05:37 PM

It can be done but I don't know the details but this guy has fitted MTS style ones to his ST4/S4 frame and ground off the frame lugs too so I'm guessing it's a similar arrangement.

http://www.ukmonster.co.uk/monster/s...ad.php?t=58085

350TSS · 19-03-2020, 12:38 AM

Darrren - can you clear your inbox for incoming?

Darren69 · 19-03-2020, 05:19 AM

Cleared my inbox now.

slob · 19-03-2020, 08:13 AM

SxR have a longer swingarm spindle, that’s drilled at the ends to take a large mounting bolt for the rearsets, which fit over the ends. You’ll probably also find that the gearlever fouls the stock l/h silencer link pipe on downshifts, also the rear master cylinder may not fit properly on earlier Monsters.

350TSS · 19-03-2020, 08:28 AM

Thanks Slob - all issues I think eminently solvable - keeping both grey cells (named "lonely" and "lonely's mate") going a bit longer

slob · 19-03-2020, 10:28 AM

Looking back through my old photos, it was high level link pipes that fouled the gear linkage, also I think the SxR has the banjo bolt/reservoir connection reversed on the master cylinder.
Of course you’ll want the end bolts as well as a new spindle.

Darren69 · 19-03-2020, 11:00 AM

Yea, they would foul my hi levels link pipes too. would probably be ok with low level ones or they could be spaced out if needed though.

Darren69 · 20-03-2020, 03:53 AM

These are now sold.

18-03-2020, 04:38 PM	#1
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,022	S2R/S4R CNC billet adjustable rearsets. I have these for sale as they were stated as for the S4 but won't fit without much hassle as they are really for the S2R/S4R style bike. They are brand new and never fitted but of unknown origin. I suspect they from far east but lovely quality and material all the same and much better than I have seen previously. I would gladly have them on my own bike. £75.00 plus post. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

18-03-2020, 05:32 PM	#3
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,022	I've not investigated fully but from what I can see they bolt to the engine lower crankcase and swingarm axle on the S4R/S2R style bikes instead of the frame like on the S4 and earlier Monsters, so you would probably need to buy some extra Ducati S4R/S2R parts of fab your own. I didn't check out the details beforehand so I don't know how much exactly that would cost, but even so they are really nice and could be worth the effort. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

18-03-2020, 05:37 PM	#4
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,022	It can be done but I don't know the details but this guy has fitted MTS style ones to his ST4/S4 frame and ground off the frame lugs too so I'm guessing it's a similar arrangement. http://www.ukmonster.co.uk/monster/s...ad.php?t=58085 __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

19-03-2020, 05:19 AM	#6
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,022	Cleared my inbox now. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

19-03-2020, 08:13 AM	#7
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,707	SxR have a longer swingarm spindle, that’s drilled at the ends to take a large mounting bolt for the rearsets, which fit over the ends. You’ll probably also find that the gearlever fouls the stock l/h silencer link pipe on downshifts, also the rear master cylinder may not fit properly on earlier Monsters. Last edited by slob; 19-03-2020 at 11:52 AM..

18-03-2020, 05:24 PM	#2
350TSS Too much time on my hands member Join Date: Jan 2013 Location: Shipbourne Bike: M900 Posts: 1,419	They do look nice and a good price too - tempted for my S4 - what makes them a hassle to fit?

19-03-2020, 12:38 AM	#5
350TSS Too much time on my hands member Join Date: Jan 2013 Location: Shipbourne Bike: M900 Posts: 1,419	Darrren - can you clear your inbox for incoming?

19-03-2020, 08:28 AM	#8
350TSS Too much time on my hands member Join Date: Jan 2013 Location: Shipbourne Bike: M900 Posts: 1,419	Thanks Slob - all issues I think eminently solvable - keeping both grey cells (named "lonely" and "lonely's mate") going a bit longer

19-03-2020, 10:28 AM	#9
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,707	Looking back through my old photos, it was high level link pipes that fouled the gear linkage, also I think the SxR has the banjo bolt/reservoir connection reversed on the master cylinder. Of course you’ll want the end bolts as well as a new spindle.

19-03-2020, 11:00 AM	#10
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,022	Yea, they would foul my hi levels link pipes too. would probably be ok with low level ones or they could be spaced out if needed though. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

20-03-2020, 03:53 AM	#11
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,022	These are now sold. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage