Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 601 | Total Threads: 50,794 | Total Posts: 518,310 Currently Active Users: 782 (0 active members) Please welcome our newest member, Foggy |
|
|
Thread Tools | Display Modes |
14-06-2020, 02:03 PM | #1 |
Guest
Posts: n/a
|
unsucessfull bleed of rear brake m821 2017
I have virtually non-existant rear brack; very long travel on peddle.
Guy checking for MOT let me off. I really don't use much rear brake; so never really noticed. Have tried to bleed several times, but no joy; just does not firm up. Tried going for run; killing via kill switch; then bleeding but nothing. First bike i have had with ABS; but I am sure I am bleeding right. Under "normal" operation if I pump brake peddle; i can here a hiss from the side of the bike; approx under side cover where there is a fill coolant cap? This sound like a leak somewhere? What do you think? Anybody any idea how I can fix? Read lots of posts about heat damaged fluid; unmounting caliper to bleed; changing master cylinder; but.... Regards, Owain |
14-06-2020, 02:09 PM | #2 |
Moderator
Join Date: Apr 2008
Location: Moreton-in-Marsh
Bike: M1100evo
Posts: 1,082
|
Owain,
Have a look at this http://www.ukmonster.co.uk/monster/s...liper+bleeding Its very informative Hope it helps
__________________
IF ALL ELSE FAILS READ THE INSTRUCTIONS |
|
|