 |
Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |  |
|
 |
|
||||
 |
 |
Registered
Members: 605 | Total Threads: 50,802 | Total Posts: 518,377 Currently Active Users: 317 (0 active members) Please welcome our newest member, ian66 |
 |
|
|
 |
|
|
Thread Tools | Display Modes |
|
|
15-10-2018, 10:34 AM
|
#1 | |
|
Registered User
Join Date: Sep 2010
Location: Leics
Bike: M900
Posts: 2,844
|
Quote:
https://www.mandp.co.uk/abba-single-...l-adaptor.html https://www.abbastands.co.uk/product...adapter&pid=24 Works fine with a 916 rear wheel, can't say for certain if big enough for the larger hub (6-bolt hub/sprocket) bikes which I believe a 1200S is? as the 916 is the smaller 5-bolt hub. The cone is 60mm at it's widest so provided the hole is no larger then it should be good. Action pics;  
__________________
M900, 916, LeMans II. 
Last edited by Dukedesmo; 15-10-2018 at 12:36 PM.. |
|
|
|
|
16-10-2018, 08:54 AM
|
#2 | |
|
Registered User
Join Date: Jun 2018
Location: Clevedon
Bike: M1200s
Posts: 560
|
Quote:
__________________
Keep the rubber side down. Mick Last edited by mickj; 16-10-2018 at 08:56 AM.. |
|
|
|
|
|
16-10-2018, 10:42 AM
|
#3 | |
|
Registered User
Join Date: Sep 2010
Location: Leics
Bike: M900
Posts: 2,844
|
Quote:
I don't have the abba balancer either, rather the £35 ebay special which was supplied with the thinner alloy cones (on 12mm shaft) which are fine for conventional 'bearing-ed' wheels as would be the paddock stand with bearings types. As per abba's website; "Designed to fit most VFR's, Ducati's, Triumphs and some BMW models." so I think it should work with the 1200S as that would be the same as most modern Ducati from 1098 - (larger displacement) Panigale etc. as although the hub is larger, I don't think it's by much? They also make a different model for BMW K1200S/R, K1300S/R, 1200GS and GS adventure; https://www.abbastands.co.uk/product...adapter&pid=51
__________________
M900, 916, LeMans II.
|
|
|
|
|
|
|
|
Hybrid Mode
