Fuel couplings S2R S4R etc

Darren69 · 30-05-2023, 07:43 PM

It has come to my attention that the plastic fuel couplings used on those bikes may be in need of replacement.

I had removed mine but assuming they were ok opted to replace the o rings as the connectors seemed fine to me. But read this:-

https://www.ebay.co.uk/itm/124811251...mis&media=COPY

I had already checked mine and I thought they were ok but apparently not, if they are round then they need replacement. Who knew if they are round then no good?

I just replaced mine and they are very not round. Check yours before they fail.

yellowfever · 30-05-2023, 10:06 PM

These went on mine after a major service that had required tank off. Fired bike up and noticed small petrol leak almost immediately. Could indeed sort of squeeze them back to fit, tighter but didn’t seem a v positive connection. So fitted new ones in the end which made a much more reassuring ‘click’ on fitting. So if yours don’t click I’d replace them. Cheaper than replacing a burnt out bike…

30-05-2023, 07:43 PM	#1
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,022	Fuel couplings S2R S4R etc It has come to my attention that the plastic fuel couplings used on those bikes may be in need of replacement. I had removed mine but assuming they were ok opted to replace the o rings as the connectors seemed fine to me. But read this:- https://www.ebay.co.uk/itm/124811251...mis&media=COPY I had already checked mine and I thought they were ok but apparently not, if they are round then they need replacement. Who knew if they are round then no good? I just replaced mine and they are very not round. Check yours before they fail. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

30-05-2023, 10:06 PM	#2
yellowfever Member Join Date: Mar 2006 Location: London Bike: S2r 1000 Posts: 172	These went on mine after a major service that had required tank off. Fired bike up and noticed small petrol leak almost immediately. Could indeed sort of squeeze them back to fit, tighter but didn’t seem a v positive connection. So fitted new ones in the end which made a much more reassuring ‘click’ on fitting. So if yours don’t click I’d replace them. Cheaper than replacing a burnt out bike…