1995 m600 trouble finding neutral any fixes?

08-04-2016, 11:41 PM

So whenever I stop and try to go into neutral it just doesn't I spend a good 5-10 mins average jumping from first to second and even after finding neutral eventually the neutral light sometimes doesn't come on for a while.

Any fixes I can know off?

Nickj · 09-04-2016, 02:49 AM

Making sure the chain tension is spot on helps a bit, as does setting up the clutch with a good bleed.
However easiest is to tap it into neutral while the bike is still just rolling.
If you try when halted just be grateful you don't have a cable clutch!!

Dirty · 09-04-2016, 05:19 PM

They are all like it. As suggested it's easier if the bike is rolling and it also should get easier with practice.

08-04-2016, 11:41 PM	#1
Strachan13 Guest Posts: n/a	1995 m600 trouble finding neutral any fixes? So whenever I stop and try to go into neutral it just doesn't I spend a good 5-10 mins average jumping from first to second and even after finding neutral eventually the neutral light sometimes doesn't come on for a while. Any fixes I can know off?

09-04-2016, 02:49 AM	#2
Nickj Too much time on my hands member Join Date: Jun 2007 Location: Forest Of Dean Bike: S2r Posts: 3,189	Making sure the chain tension is spot on helps a bit, as does setting up the clutch with a good bleed. However easiest is to tap it into neutral while the bike is still just rolling. If you try when halted just be grateful you don't have a cable clutch!! __________________ "The final measure of any rider's skill is the inverse ratio of his preferred Traveling Speed to the number of bad scars on his body." Song of the sausage creature

09-04-2016, 05:19 PM	#3
Dirty Bockloks Join Date: Jan 2012 Location: London Bike: No Bike Yet! Posts: 4,601	They are all like it. As suggested it's easier if the bike is rolling and it also should get easier with practice. __________________ Wounds heal, chicks dig scars, glory lasts forever Beware of eBay