Rearsets - Page 2

ChrisC2925 · 23-12-2018, 06:40 PM

Quote:

Originally Posted by Moco1961

Chris, are your rear sets ok now after Oulton Park, these look pretty smart ?

These won't fit mine, Mike, but I'll see if they do ones that will. Mine are Ducabits so I've discovered. They are perfectly serviceable now they have been tweeked a bit.

holty · 24-12-2018, 04:30 AM

Hi
You are correct I would like to ditch the standard set-up to enhance the assthects and not aulter the riding position. I’m wondering if I walk into Riders what parts to ask for and should I go for the 1100evo pegs assembly or the S2r? Any photos or parts list?
The last MOT I received an advisory for my Termi exhasult with baffles fitted which was very strange because it was the same tester for all the previous MOT’s when I challenged the advisory I was told that my Termis were non standard and to noisy? I had silver tape covering the not for road use markings. I am wondering what will happen the next time and if I modify the bike would this lead to a list of advisories?
So, what does getting an advisory actually mean? In my case nothing because I’m keeping the current set up because along with other mods and the bike runs sweet! And will be offered up the same the next time around.

Mossleymonster · 24-12-2018, 07:13 AM

Here you are Holty.

Regarding MOT advisories for the Termi's I went to two MOT stations (Bike shops) and asked them if they would issue an advisory or if I need my baffles in before I took it for test. Chose the one that was happy, got an MOT without baffles and no advisory.

https://www.ebay.co.uk/itm/ducati-monster-s4rs-s4r-s2r-1000-1100-1100-evo-rearset-footrest-set/302990090407?hash=item468b9de0a7:g:HuwAAOSwzMhbnKE x:rk:15

f:0

Mossleymonster · 24-12-2018, 08:15 AM

As mentioned before, these do not come with a brake light switch, also, the brake light switch is generic and does not come with a connector for plugging into the bike. I hate hacking wiring! Even more than discovering hacked wiring!

The connector.

The seller, a whole £1.54 so no excuses.
https://www.ebay.co.uk/itm/1-2-3-4-5...r=550859030843

The brake light switch.

The seller.

https://www.ebay.co.uk/itm/Single-RearSet-Hydraulic-Brake-Pressure-Light-Switch-Cable-Banjo-bolt-M10x1mm-UK/232786319647?epid=2055214799&hash=item363325591f:g:iF0AAOSwj0RbDW-k:rk:1

f:0

buzzbomb · 24-12-2018, 09:18 AM

That's a really good find Mm and though they may look expensive that's only a fraction of the cost from a dealer, I think that a slightly longer brake line would also be needed.

Mossleymonster · 24-12-2018, 09:28 AM

Quote:

Originally Posted by buzzbomb

That's a really good find Mm and though they may look expensive that's only a fraction of the cost from a dealer, I think that a slightly longer brake line would also be needed.

I think £200 is not a bad price, I dread to think what new would be...

Out of interest, where did you get your extended brake line made?

buzzbomb · 24-12-2018, 12:51 PM

If you speak to Tom at moorespeed he will get you a hel pipe made up just send the OEM pipe with how much longer you want it made.
I added 30 MM when I fitted the s2r pegs and it all went back in th original position

Mossleymonster · 24-12-2018, 01:05 PM

Thanks, will do.

Mossleymonster · 24-12-2018, 01:17 PM

Gear change side pics.

[IMG]

[/IMG]

24-12-2018, 07:13 AM	#18
Mossleymonster Registered User Join Date: Nov 2017 Location: Barnsley Bike: M1100s Posts: 238	Here you are Holty. Regarding MOT advisories for the Termi's I went to two MOT stations (Bike shops) and asked them if they would issue an advisory or if I need my baffles in before I took it for test. Chose the one that was happy, got an MOT without baffles and no advisory. https://www.ebay.co.uk/itm/ducati-monster-s4rs-s4r-s2r-1000-1100-1100-evo-rearset-footrest-set/302990090407?hash=item468b9de0a7:g:HuwAAOSwzMhbnKE x:rk:15f:0 __________________ Always remember. Your home is at risk if you set fire to it. Last edited by Mossleymonster; 24-12-2018 at 07:16 AM..

24-12-2018, 08:15 AM	#19
Mossleymonster Registered User Join Date: Nov 2017 Location: Barnsley Bike: M1100s Posts: 238	As mentioned before, these do not come with a brake light switch, also, the brake light switch is generic and does not come with a connector for plugging into the bike. I hate hacking wiring! Even more than discovering hacked wiring! The connector. The seller, a whole £1.54 so no excuses. https://www.ebay.co.uk/itm/1-2-3-4-5...r=550859030843 The brake light switch. The seller. https://www.ebay.co.uk/itm/Single-RearSet-Hydraulic-Brake-Pressure-Light-Switch-Cable-Banjo-bolt-M10x1mm-UK/232786319647?epid=2055214799&hash=item363325591f:g:iF0AAOSwj0RbDW-k:rk:1f:0 __________________ Always remember. Your home is at risk if you set fire to it.

24-12-2018, 01:05 PM	#23
Mossleymonster Registered User Join Date: Nov 2017 Location: Barnsley Bike: M1100s Posts: 238	Thanks, will do. __________________ Always remember. Your home is at risk if you set fire to it.

24-12-2018, 01:17 PM	#24
Mossleymonster Registered User Join Date: Nov 2017 Location: Barnsley Bike: M1100s Posts: 238	Gear change side pics. [IMG] [/IMG] __________________ Always remember. Your home is at risk if you set fire to it.

24-12-2018, 04:30 AM	#17
holty Registered User Join Date: Jun 2010 Location: Glastonbury Bike: M1100 Posts: 96	Hi You are correct I would like to ditch the standard set-up to enhance the assthects and not aulter the riding position. I’m wondering if I walk into Riders what parts to ask for and should I go for the 1100evo pegs assembly or the S2r? Any photos or parts list? The last MOT I received an advisory for my Termi exhasult with baffles fitted which was very strange because it was the same tester for all the previous MOT’s when I challenged the advisory I was told that my Termis were non standard and to noisy? I had silver tape covering the not for road use markings. I am wondering what will happen the next time and if I modify the bike would this lead to a list of advisories? So, what does getting an advisory actually mean? In my case nothing because I’m keeping the current set up because along with other mods and the bike runs sweet! And will be offered up the same the next time around.

24-12-2018, 09:18 AM	#20
buzzbomb Gold Member Join Date: Mar 2009 Location: widnes Bike: M1100s Posts: 780	That's a really good find Mm and though they may look expensive that's only a fraction of the cost from a dealer, I think that a slightly longer brake line would also be needed.

24-12-2018, 12:51 PM	#22
buzzbomb Gold Member Join Date: Mar 2009 Location: widnes Bike: M1100s Posts: 780	If you speak to Tom at moorespeed he will get you a hel pipe made up just send the OEM pipe with how much longer you want it made. I added 30 MM when I fitted the s2r pegs and it all went back in th original position