Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 607 | Total Threads: 50,802 | Total Posts: 518,378 Currently Active Users: 347 (0 active members) Please welcome our newest member, WazS4r |
|
|
Thread Tools | Display Modes |
|
24-05-2020, 10:31 AM | #1 |
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
|
28-05-2020, 02:17 PM | #2 |
Registered User
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 392
|
I have to say my new Iphone takes great photos! in fact I have stopped using my SLR all together now!
Been out and about the last few days bedding things in after the rebuild... one thing I noticed was its slow to turn over when you start it. I had upgraded the cables, and the starter itself was good, so I had another look at the timing. When I did the map, I had the first RPM point at 400 with 10 degrees BTDC and the second at 1000 again with 10 degrees... so i changed this to 5 degrees from 400 to 1000, so there is not so much advance at cranking speed. I also configured the software so it did two full dead revolutions before it sparks...* this means the engine is properly spinning before it fires... It really spins over now and starts MUCH better |
|
|