UK Monster Owners Club Forum » .: Technical :. » Mods & How To's » always wanted a Monster, never quite got one, but...

Reply
 
Thread Tools Display Modes
Old 26-01-2020, 03:16 PM   #1
buzzer
Registered User
 
buzzer's Avatar
 
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 400
always wanted a Monster, never quite got one, but...

For years I always fancied a 900 Monster... I did dabble with a 600 for a while, but its always been my ambition to own an early carb 900... Early 2019 I looked around for one, even put an advert on this forum, but nothing came up that was suitable, I wanted one I could rebuild as a winter project... Then I got sidetracked when a tatty ST4s came up cheap.

Next winter's project is definitely going to be a restoration of an early Monster, just need to find the right bike, but time is on my side...

below is the story in pictures of the ST4s winter build... a bit to go yet...here's what I started with. it looks far better in the pictures than it was... it was actually really tatty...




















Last edited by buzzer; 26-01-2020 at 03:20 PM..
buzzer is offline   Reply With Quote
Old 26-01-2020, 03:17 PM   #2
buzzer
Registered User
 
buzzer's Avatar
 
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 400


















buzzer is offline   Reply With Quote
Old 26-01-2020, 03:18 PM   #3
buzzer
Registered User
 
buzzer's Avatar
 
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 400











buzzer is offline   Reply With Quote
Old 26-01-2020, 03:59 PM   #4
Moco1961
Guest
 
Posts: n/a
Impressive buzzer....obviously no stranger to fabrication, nice job
  Reply With Quote
Old 26-01-2020, 04:21 PM   #5
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,963
10 out of 10 or that mate..

I like your tool making especially the tube crimping die.
I also like the Silver theme. Gold on Silver looks good, but I think you need to bring the disc centres, clutch plate and spring colours together to get the score up to 11, Gold would be nice but all the same colour would be tops.

On the rear stay of the (very nice) front mudguard how have you picked up the fastener on the top calliper bolt without upsetting the alignment of the calliper?

Turn up to any Monster meet on that and be accepted..
__________________
Mr Gazza is offline   Reply With Quote
Old 26-01-2020, 04:34 PM   #6
buzzer
Registered User
 
buzzer's Avatar
 
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 400
Quote:
Originally Posted by Mr Gazza View Post
10 out of 10 or that mate..

I like your tool making especially the tube crimping die.
I also like the Silver theme. Gold on Silver looks good, but I think you need to bring the disc centres, clutch plate and spring colours together to get the score up to 11, Gold would be nice but all the same colour would be tops.

On the rear stay of the (very nice) front mudguard how have you picked up the fastener on the top calliper bolt without upsetting the alignment of the calliper?

Turn up to any Monster meet on that and be accepted..
Thanks! I may do something with the gold discs... they do look a bit odd. the mudguard stay is bolted to the caliper bracket, I just frilled and tapped a 5mm hole.
buzzer is offline   Reply With Quote
Old 26-01-2020, 04:39 PM   #7
buzzer
Registered User
 
buzzer's Avatar
 
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 400
Quote:
Originally Posted by Moco1961 View Post
Impressive buzzer....obviously no stranger to fabrication, nice job
thanks! I have done this sort of thing as a hobby all my life... I retired 9 years ago and have done some sort of project every winter, and ridden it, or drove it in the summer, then I usually sell it on. I did however keep last years project as I loved riding it over the summer... here is what last years looked like... also converted from EFI to carbs!

buzzer is offline   Reply With Quote
Old 26-01-2020, 04:41 PM   #8
buzzer
Registered User
 
buzzer's Avatar
 
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 400
Oh, and hear is the 996 starting up

https://www.youtube.com/watch?v=t_zGWiIyVQs
buzzer is offline   Reply With Quote
Old 26-01-2020, 05:12 PM   #9
Moco1961
Guest
 
Posts: n/a
.....as I was scrolling down to look at last years project and caught the top of iron bridge I thought ,he'll that's impressive........of course the bike is amazing, that's some build buzzer
  Reply With Quote
Old 26-01-2020, 05:13 PM   #10
Luddite
Registered User
 
Luddite's Avatar
 
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
Beautiful work - can't wait to see what you do with a Monster!
Luddite is offline   Reply With Quote
Old 26-01-2020, 05:19 PM   #11
buzzer
Registered User
 
buzzer's Avatar
 
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 400
Quote:
Originally Posted by Luddite View Post
Beautiful work - can't wait to see what you do with a Monster!
I think a Monster would be a straight restoration, to me its an iconic design
buzzer is offline   Reply With Quote
Old 26-01-2020, 05:37 PM   #12
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,963
Thanks, I see how you've done the stay now... Planning something along similar lines myself.

I'll shut up about the colours now, you seem to have things under control..

Just so much clever stuff, exquisitely and skillfully executed, it's really difficult not run out of suerlatives... I remain in awe.
__________________

Last edited by Mr Gazza; 26-01-2020 at 05:40 PM..
Mr Gazza is offline   Reply With Quote
Old 26-01-2020, 06:04 PM   #13
ChrisC2925
Registered User
 
ChrisC2925's Avatar
 
Join Date: Jan 2013
Location: Ormskirk
Bike: M600
Posts: 244
Lovely workmanship, I bet it shifts too!
ChrisC2925 is offline   Reply With Quote
Old 26-01-2020, 06:31 PM   #14
Grumpy
record breaker!!
 
Grumpy's Avatar
 
Join Date: Apr 2006
Location: Peterborough
Bike: M1200R
Posts: 2,155
What an interesting and well executed rebuild.....love the heated workshop!( Slightly green with envy!)
If you fancy showing the bike in the flesh, we are having a get together in may, pop along and join in


http://www.ukmonster.co.uk/monster/s...ad.php?t=57860
__________________
It's not the destination, but the journey that matters
Definition of a motorbike, a devise for overtaking cars!
Grumpy is offline   Reply With Quote
Old 27-01-2020, 10:10 AM   #15
Darren69
Transmaniacon MOC
 
Darren69's Avatar
 
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,091
It's virtually an S4 Monster. It'll be interesting to see how it compares performance wise without the EFI.
__________________
Roast Beef Monster!

Termignoni and Bucci - Italian for pipe and slippers!

S4 Fogarty, S4R 07T, 748, Series 1 Mirage
Darren69 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:45 PM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.