Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 636 | Total Threads: 50,828 | Total Posts: 518,538 Currently Active Users: 1,156 (0 active members) Please welcome our newest member, jaraduke |
|
|
Thread Tools | Display Modes |
04-06-2023, 09:16 PM | #16 |
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
|
05-06-2023, 07:29 AM | #17 |
Registered User
Join Date: Sep 2022
Location: Beeston
Bike: M900
Posts: 306
|
I've got a lightened flywheel for the original carbed engine but I suspect that its not going to work with what I need to do the ie to carb swap
__________________
Ducati Monster 900 - Yamaha tdr125 & dt200wr - Ford GPW |
05-06-2023, 08:52 AM | #18 |
Registered User
Join Date: Sep 2010
Location: Leics
Bike: M900
Posts: 2,848
|
I'm not sure if it's the case with the 900 engines but are the crankshafts the same as the older carbie?
Asking because, on Desmoquattro engines when they changed from single-phase to 3-phase alternator they used a different crankshaft, such that you can't (easily) retrofit the 3-phase to older bikes as the flywheel assembly won't bolt on. If this is the case with the 900 then, maybe the carbie flywheel with the pickups won't fit onto the crankshaft? I have to add, I don't know if this is the case but you'd need to investigate - check the end of the crankshaft, threads, length, keyway etc.
__________________
M900, 916, LeMans II. |
05-06-2023, 09:24 AM | #19 | |
Lord of the Rings
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,853
|
Quote:
Assuming that the new engine already has an alternator, then all you have to do is match it with either a two or three wire Regulator/Rectifier, depending how many Yellow cables come out of the alternator. 900ie should have three. If you don't have an alternator yet then 3-phase is definitely the way to go. Not sure how this swerved to flywheel, but standard will work just fine on that.
__________________
|
|
05-06-2023, 09:40 AM | #20 |
Registered User
Join Date: Sep 2022
Location: Beeston
Bike: M900
Posts: 306
|
The casing is still on the ie engine and the carbed one is completely apart so will be easy to compare the parts when I get into it.
I think what the issue maybe is the combination of ignition pickups / flywheel / crankshaft. The ie engine has the 3 yellow wires and the carbed version has 2 but its the pulse coils that are different as the ie motor has 3 wires where as the carbed version has 4 If the ie coils will power the Ignitech unit ok then that should be much easier or am I missing something really obvious here?
__________________
Ducati Monster 900 - Yamaha tdr125 & dt200wr - Ford GPW |
05-06-2023, 09:53 AM | #21 | |
Registered User
Join Date: Sep 2010
Location: Leics
Bike: M900
Posts: 2,848
|
Quote:
I don't know but would think the i.e. uses a 'missing tooth' pickup on the gear for reference and then the ECU determines firing points? If so then you'd (probably) need to fit the carbie style flywheel and pickups for which, pickup mounting points should be there (they are on a 916) but, if the flywheel mounting is different then it might complicate things?
__________________
M900, 916, LeMans II. |
|
05-06-2023, 10:10 AM | #22 |
Registered User
Join Date: Jul 2014
Location: Portsmouth
Bike: M900
Posts: 1,510
|
Do you have the Ignitech already? and so have the instruction manual.
I have it as a pdf if you need it. You are right in that the Carbie 900 has a 4 wire bundle coming out of the case from the pick-ups, but having looked at the pdf wiring diagram for the Ignatech I fitted to my M900 it appears to only show 3 wires. The 4 wires go straight to the IC ignitors which are of course replaced by the new unit. It can't have been that difficult to sort out if I managed it, and I don't remember it being difficult. It certainly worked.
__________________
Heaven doesn't want me, and Hell is afraid I'll take over. |
05-06-2023, 10:41 AM | #23 |
Registered User
Join Date: Sep 2010
Location: Leics
Bike: M900
Posts: 2,848
|
Carbie engine showing the 2 pickups under the flywheel, albeit not too clearly;
Later injected engine, all be it a 4v so maybe not the same as 900i.e.? showing the 'missing' tooth (actually 2 teeth) setup that a single sensor reads from, there is no pickup on the flywheel as the sensor fits through the outer crankcase and simply 'looks' at the timing gear. Obviously you can remove the pickup from the 'i.e' type (carbie cover doesn't have the hole in the case) and there should be the mounting holes for the 2 pickup bracket from flywheel assembly. What I don't know is whether the carbie flywheel is interchangeable with i.e. alternator/flywheel as the 3-phase alternator is (in 4v engines anyway) a different setup and the flywheel to crankshaft fitting is different. There maybe ways round this but it might not be plug and play?
__________________
M900, 916, LeMans II. |
05-06-2023, 11:25 AM | #24 |
Registered User
Join Date: Sep 2022
Location: Beeston
Bike: M900
Posts: 306
|
Looks like I need to get into the ie engine and do some digging.
If not possible I'll have to sell the 900ie engine and put the proceeds towards rebuilding the carby motor which will teach me for buying something without checking first and delay things greatly
__________________
Ducati Monster 900 - Yamaha tdr125 & dt200wr - Ford GPW |
05-06-2023, 02:34 PM | #25 |
Transmaniacon MOC
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,038
|
You can get heavier flywheels? Lighter is usually to way to go, to improve performance. poor low speed running is usually down to poor (lean) fuelling.
__________________
Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage |
05-06-2023, 03:17 PM | #26 |
Bronze Member
Join Date: Nov 2014
Location: Hondon de los Frailes
Bike: S4r
Posts: 288
|
I love the sense of humour on here
|
06-06-2023, 07:02 AM | #27 |
Registered User
Join Date: Sep 2022
Location: Beeston
Bike: M900
Posts: 306
|
Ignitech have come back to me within 24 hours to say that they produce a version of the ignition TCIP4 that accepts the ie pickup coil and will suit my needs for 155 Euro's plus an additional 5 for the reduced harness with the correct female plug on it
Glad I took the time to email them now!
__________________
Ducati Monster 900 - Yamaha tdr125 & dt200wr - Ford GPW |
06-06-2023, 09:32 AM | #28 |
Registered User
Join Date: Sep 2010
Location: Leics
Bike: M900
Posts: 2,848
|
Yes, I am aware that Ignitech make different versions of the unit. I recall, when I was building mine there was a chap I met at SPR's dyno who was building a similar setup to me (air cooled, 944cc) but was using the bottom end from an ST something and I think he had a different Ignitech, designed for use with a single sensor/pick up?
__________________
M900, 916, LeMans II. |
06-06-2023, 10:17 AM | #29 | |
Registered User
Join Date: Sep 2022
Location: Beeston
Bike: M900
Posts: 306
|
Quote:
__________________
Ducati Monster 900 - Yamaha tdr125 & dt200wr - Ford GPW |
|
06-06-2023, 10:24 AM | #30 |
Transmaniacon MOC
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,038
|
The single phase bikes like my 748 have a different crank so not straightforward to swap to 3 phase or vice versa. If that helps?
__________________
Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage |
|
|