M1000 track bike - Page 15

slob · 30-09-2013, 10:11 AM

It's the stock one cut down (just for the MOT) the side panels are now gone again and I need to make a new chain guard to replace the hugger, my first one developed a crack so has been discarded.
The bike is currently down to 169kg wet, so just over 20kg lighter than stock.
Making it less 'wheelbarrow' is quite high on my list of priorities, once running in is complete.

J.P · 30-09-2013, 10:19 AM

Slob,
Given the wheelbarrow appearance are you just going to chop the cans down in size and leave all the rest the same ? Seems the simplest of options, other than lengthening the whole bike......

slob · 30-09-2013, 10:21 AM

2into1 pipe... more weight saving ;-)

(cue Jonzi's 'fat old man' comments)

pompone · 30-09-2013, 11:44 AM

Quote:

Originally Posted by slob

(cue Jonzi's 'fat old man' comments)

With the amount of food he eats won't be laughing for long

Dirty · 01-10-2013, 12:54 AM

Quote:

Originally Posted by slob

2into1 pipe... more weight saving ;-)

)

Who are you getting to make the headers Slob?

slob · 01-10-2013, 06:45 AM

I've got some JHP ones for a 620, just need to extend them a little for the extra stroke on the DS Motor.

Funkatronic · 17-11-2013, 08:49 PM

so how did it run round cartagena???

Albie · 27-06-2015, 09:42 PM

Quote:

Originally Posted by slob

Now the fun can really start

I like that engine stand. I am thinking of making one so I can clean and paint it or worse case scenario do work on it, Looks like its finely balanced but good access all round. Any tips you have before I get making one.

slob · 28-06-2015, 07:58 AM

nope, it's simple: short at the back, long at the front

edit: I've thought of a couple of things
. use allen bolts, not hex head for more clearance.
. make sure the height is about the same as when the bike is sat on its wheels.

utopia · 28-06-2015, 01:48 PM

The engine stand looks really handy.
Mind you, it does look like it results in the weight of the engine putting a lot of load on the rear mounts (ie a clockwise turning moment when viewed from the right hand side).
I can't see that being a critical issue as the cases are probably strong enough to take it, but its massively more than the design originally intended and would possibly be significantly increased when you're heaving on a spanner.
So I was just thinking, could you add a removable support at the front ?
You could still remove it for when you needed the access but refit it afterwards.
I guess even a block of wood would do the job, but a pukka extension would be neat, and much more secure during the aforementioned spanner heaving.

gary tompkins · 28-06-2015, 10:41 PM

those mounting points are used for footrest hangers on monster, so not a stressed part of design

main frame mounts to top of engine

slob · 29-06-2015, 02:12 PM

I had no issues with either clutch or alternator nuts, the bosses round the holes are substantial and the other side takes the side stand.

jonzi · 29-06-2015, 02:44 PM

I had my 600ss on these stands for a few months with no problems and Ray uses the same at RC.

And similar types are shown in pics on Google image search.

I am going to get a set made up, for Ducati's and the Triumph.

Dirty · 29-06-2015, 03:03 PM

I could do with a set of my own, the set is the pic is currently holding my wet clutch engine

jonzi · 29-06-2015, 03:05 PM

Quote:

Originally Posted by Dirty

I could do with a set of my own, the set is the pic is currently holding my wet clutch engine

Some one should do a welding course and make some up.

30-09-2013, 10:19 AM	#212
J.P No more Monster... Join Date: Jan 2007 Location: London Bike: Other Not a Ducati Posts: 4,326	Slob, Given the wheelbarrow appearance are you just going to chop the cans down in size and leave all the rest the same ? Seems the simplest of options, other than lengthening the whole bike...... __________________ J.JP ------------------------------- My Mum says, there's no such thing as Monsters.

28-06-2015, 07:58 AM	#219
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,714	nope, it's simple: short at the back, long at the front edit: I've thought of a couple of things . use allen bolts, not hex head for more clearance. . make sure the height is about the same as when the bike is sat on its wheels. Last edited by slob; 28-06-2015 at 01:51 PM..

28-06-2015, 10:41 PM	#221
gary tompkins 1/2 man - 1/2 pogo-stick Join Date: Aug 2002 Location: Dartford, Kent Bike: M900ie Posts: 7,241	those mounting points are used for footrest hangers on monster, so not a stressed part of design main frame mounts to top of engine __________________ GT Fully paid up member of the S.A.S. (Scottoiler Appreciation Society) 27,000 miles on original chain - and still going strong!

29-06-2015, 02:44 PM	#223
jonzi Mary Mary Quite Contrary Join Date: Mar 2012 Location: Berkhamsted Bike: M796 Posts: 1,398	I had my 600ss on these stands for a few months with no problems and Ray uses the same at RC. And similar types are shown in pics on Google image search. I am going to get a set made up, for Ducati's and the Triumph. __________________ #48

29-06-2015, 03:03 PM	#224
Dirty Bockloks Join Date: Jan 2012 Location: London Bike: No Bike Yet! Posts: 4,601	I could do with a set of my own, the set is the pic is currently holding my wet clutch engine __________________ Wounds heal, chicks dig scars, glory lasts forever Beware of eBay

30-09-2013, 10:11 AM	#211
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,714	It's the stock one cut down (just for the MOT) the side panels are now gone again and I need to make a new chain guard to replace the hugger, my first one developed a crack so has been discarded. The bike is currently down to 169kg wet, so just over 20kg lighter than stock. Making it less 'wheelbarrow' is quite high on my list of priorities, once running in is complete.

30-09-2013, 10:21 AM	#213
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,714	2into1 pipe... more weight saving ;-) (cue Jonzi's 'fat old man' comments)

01-10-2013, 06:45 AM	#216
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,714	I've got some JHP ones for a 620, just need to extend them a little for the extra stroke on the DS Motor.

17-11-2013, 08:49 PM	#217
Funkatronic another year another bike Join Date: Jul 2008 Location: London Bike: S2r 1000 Posts: 1,597	so how did it run round cartagena???

28-06-2015, 01:48 PM	#220
utopia No turn left unstoned Join Date: Jun 2010 Location: leicester Bike: M750 Posts: 4,545	The engine stand looks really handy. Mind you, it does look like it results in the weight of the engine putting a lot of load on the rear mounts (ie a clockwise turning moment when viewed from the right hand side). I can't see that being a critical issue as the cases are probably strong enough to take it, but its massively more than the design originally intended and would possibly be significantly increased when you're heaving on a spanner. So I was just thinking, could you add a removable support at the front ? You could still remove it for when you needed the access but refit it afterwards. I guess even a block of wood would do the job, but a pukka extension would be neat, and much more secure during the aforementioned spanner heaving.

29-06-2015, 02:12 PM	#222
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,714	I had no issues with either clutch or alternator nuts, the bosses round the holes are substantial and the other side takes the side stand.