Swingarm pivot and shims

[Dukedesmo]

Originally Posted by 900Rebuilder

Red Fox is looking for one for me at mo - I measured 265mm and they have NOS at 263mm so assume it may be the right one.

I'm going to be opening my own collection of swingarm axles at this rate!

If 263mm is long enough then I've got this going spare if you're interested;



As near as I can see, around 263/264mm. The clip grooves are 3mm in from the ends, it fits perfectly on an M900 swingarm but although long enough to fit flush with my old 851/888 arm, it was too short to fit the clips.