UK Monster Owners Club Forum » .: Warm Up Area :. » A nice place for new members to say hello » Advice please on rebuilding a 2005 Monster

Reply
 
Thread Tools Rate Thread Display Modes
Old 03-09-2019, 09:52 AM   #1
Hamish
Guest
 
Posts: n/a
Advice please on rebuilding a 2005 Monster

Hi Everyone,

My godson and I have just bought a 2005 Monster 620 Dark - 02, with a V5 & all the paperwork from the previous owner, in 4 large wooden crates.

We have unboxed everything and are starting to clean and label all the bits, ready for a full rebuild. It has been boxed for about 5 years.

The engine turns and it looks like we have a complete bike. We have ordered a Haynes workshop manual.

Our plans are:

Drain engine oil and replace. What oil please?
Replace cambelts, plugs, air filter, fuel pipes, battery? Where to buy these parts please?
Remove alarm to stop noise and immobiliser kicking in when we come to start it?
Replace 2013 dated tyres?
The spark plugs are old Champions RA6 HC & RA4 HC - are these correct, or can any UKMOC members suggest best plugs to buy please?
We need to replace 4 badly corroded exhaust studs. Cann we use studs from local nut & bolt shop?
Cambelts are labelled 190 187 5 208 DS & 153 5 208 DS - can we just order 2005 Monster belts?
Replace belt tensioners or service & keep?
The injector packs have been cleaned with carb cleaner - do we need to strip and rebuild like an old carb, or should they work OK with new fuel please?

ANY ADVICE WELCOMED PLEASE?

We live in Norfolk - Any MOC members live near us who would like a look at it over a cuppa and biscuits?

Thanks in anticipation.

Richard & Hamish
  Reply With Quote
Old 03-09-2019, 10:28 AM   #2
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,963
What sort of biscuits have you got?
__________________
Mr Gazza is offline   Reply With Quote
Old 03-09-2019, 10:38 AM   #3
mickj
Registered User
 
mickj's Avatar
 
Join Date: Jun 2018
Location: Clevedon
Bike: M1200s
Posts: 565
Welcome to the forum Hamish , good luck with your project and I'm sure there will be plenty of help forthcoming from the other members, hobnobs is always a good starting point .
__________________
Keep the rubber side down. Mick
mickj is offline   Reply With Quote
Old 03-09-2019, 10:54 AM   #4
slob
.
 
slob's Avatar
 
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,733
+fuel filter

parts: Call Craig or Luke at Moto Rapido 01962 873981 (mention UKMOC for 10% discount on most parts) Super efficient mail order.
slob is offline   Reply With Quote
Old 03-09-2019, 10:56 AM   #5
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,963
Drain engine oil and replace. What oil please? 10w40 Motorcycle specific semi-synth. Don't use car oil or the clutch will slip.

Replace cambelts, Ducati belts from Moto Rapido, or Exactfit from http://www.exactuk.com/about-exactfit-cam-belts/
plugs, Use NGK, not Champion, correct number will be in the Haynes manual.
air filter, and oil filter.. K&N from ebay
fuel pipes, Moto Rapido again.
battery? Motobatt.. Price doesn't vary much but shop around on ebay
Where to buy these parts please?
Remove alarm to stop noise and immobiliser kicking in when we come to start it? Pass!
Replace 2013 dated tyres? Oh yes definitely!!
The spark plugs are old Champions RA6 HC & RA4 HC - are these correct, or can any UKMOC members suggest best plugs to buy please? As above NGK
We need to replace 4 badly corroded exhaust studs. Cann we use studs from local nut & bolt shop? Yes, use stainless if you can.
Cambelts are labelled 190 187 5 208 DS & 153 5 208 DS - can we just order 2005 Monster belts? Order for 620.. As above.
Replace belt tensioners or service & keep? If they spin freely and are not rough, use again. Expect a little resistance from the seals
The injector packs have been cleaned with carb cleaner - do we need to strip and rebuild like an old carb, or should they work OK with new fuel please? Ultra-sound cleaner is best... Pop them in the one I currently have on loan from Utopia, a member on here.

ANY ADVICE WELCOMED PLEASE?

We live in Norfolk - Any MOC members live near us who would like a look at it over a cuppa and biscuits? See previous post..

Thanks in anticipation.

Richard & Hamish
__________________
Mr Gazza is offline   Reply With Quote
Old 03-09-2019, 11:00 AM   #6
slob
.
 
slob's Avatar
 
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,733
NGK DCPR8E

I'd use something like these on the exhaust studs https://www.ebay.co.uk/itm/Copper-Fl...r=561918993594
slob is offline   Reply With Quote
Old 03-09-2019, 11:09 AM   #7
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,963
Quote:
Originally Posted by slob View Post
NGK DCPR8E

I'd use something like these on the exhaust studs https://www.ebay.co.uk/itm/Copper-Fl...r=561918993594
Good call Rob.. Couldn't remember the number off hand, and not sure if same for 620.

Slar plenty of coppaslip round if you use stainless studs... You'll know how to slar it if you're true Norfolk...
__________________
Mr Gazza is offline   Reply With Quote
Old 03-09-2019, 11:58 AM   #8
utopia
No turn left unstoned
 
utopia's Avatar
 
Join Date: Jun 2010
Location: leicester
Bike: M750
Posts: 4,559
Yep, just to confirm that if Gazza is ok with it, you can certainly stick your injectors in my ultrasonic cleaner which he currently has on loan.

Is the fuel tank plastic or steel ?
If plastic, be aware that ethanol in petrol causes them to swell and not fit properly.
Draining and leaving them to dry out makes them shrink back to original dimensions.
I imagine its completely empty now, but worth making sure.
utopia is offline   Reply With Quote
Old 03-09-2019, 07:27 PM   #9
dacs
Registered User
 
dacs's Avatar
 
Join Date: Dec 2014
Location: Aylsham
Bike: Multiple Monsters
Posts: 200
Hamish, welcome. I'm not that far from you, in Aylsham. You don't say whether this is your first Monster so the following may be superfluous but the hardest thing I found when fiddling with (sorry, maintaining) mine was dropping the assumptions that come with working on Japanese motorcycles - the design approaches are culturally different.
This link may help https://www.ducatiomaha.com/pages/ducati-oem-parts - drop down the page until you find the appropriate year and model for part numbers/exploded diagrams to supplement the Haynes manual.
Be aware that buying new Ducati bits will avoid the minefield of trying to find second-hand stuff on Ebay, which will fit A Monster but not necessarily YOUR Monster (don't ask how much I spent finding that out).
Ask on this Forum if you have a problem, there will always be someone who can give an answer in my experience. Best of luck with the 4 boxes of bits, I look forward to photos of the completed build.
__________________
NFN
dacs is offline   Reply With Quote
Old 03-09-2019, 08:11 PM   #10
Uncle Bob
Registered User
 
Uncle Bob's Avatar
 
Join Date: Jan 2017
Location: Milton Keynes
Bike: M1100evo
Posts: 233
Hello and welcome. I can guarantee you that I'll be absolutely no help to you technically, but I'll definitely be following your progress with great interest!
Uncle Bob is offline   Reply With Quote
Old 03-09-2019, 08:31 PM   #11
Moco1961
Guest
 
Posts: n/a
Google is our friend

Quote:
Originally Posted by Mr Gazza View Post
Slar plenty of coppaslip round if you use stainless studs... You'll know how to slar it if you're true Norfolk...
.....SPREAD, !.........I love a good quiz, you'll have to try harder than that Gary
  Reply With Quote
Old 03-09-2019, 10:54 PM   #12
Grumpy
record breaker!!
 
Grumpy's Avatar
 
Join Date: Apr 2006
Location: Peterborough
Bike: M1200R
Posts: 2,155
Biscuits.....did someone day biscuits!
__________________
It's not the destination, but the journey that matters
Definition of a motorbike, a devise for overtaking cars!
Grumpy is offline   Reply With Quote
Old 04-09-2019, 09:15 PM   #13
Flip
Registered User
 
Flip's Avatar
 
Join Date: Mar 2010
Location: Beachtown
Bike: M900
Posts: 2,188
Quote:
Originally Posted by Mr Gazza View Post
What sort of biscuits have you got?
Quote:
Originally Posted by Grumpy View Post
Biscuits.....did someone day biscuits!
Trust you two!!!

Hamish and Richard, good luck with the rebuild- you know what they say when doing these things to always allow your budget, plus at least half again over?

That theory may be tested!
__________________
You're perfect, yes, it's true- But without me you're only you!
Flip is offline   Reply With Quote
Old 05-09-2019, 08:19 AM   #14
Darkness
.
 
Darkness's Avatar
 
Join Date: May 2007
Location: Stockbridge
Bike: M900
Posts: 1,984
Especially the biscuit kitty!
__________________
Original and Best since 1993
Darkness is offline   Reply With Quote
Old 05-09-2019, 09:26 AM   #15
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,963
Ug oh! Better allow more for the biscuits already...Leave the Hobnobs alone Boris you 2@.

http://www.msn.com/en-gb/news/uknews...34p?ocid=ientp
__________________
Mr Gazza is offline   Reply With Quote
Reply

Tags
full rebuild.


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:22 PM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.