UK Monster Owners Club Forum » .: Technical :. » Engines, Clutch, Gears » 14 tooth on 1100 evo

Reply
 
Thread Tools Display Modes
Old 21-08-2019, 04:15 PM   #31
chris.p
Gold Member
 
chris.p's Avatar
 
Join Date: Mar 2004
Location: lincoln
Bike: No Bike Yet!
Posts: 876
Quote:
Originally Posted by Rrawlings View Post
So similar reason to me then last of the air cooled monsters and I’d wanted a monster since sitting on the original 900 at the bike show as a kid. I had an Sv650 that I absolutely loved but had poor suspension so I swapped to a Triumph and a few bikes later decided to take he plunge. I plan to do some suspension work at some point and will go have a chat with I local guy who is a retired racer that made the Daytona suspension outstanding rather than just very good by doing some internal alterations when other places just wanted me to put their cartridge kits in. I will possibly get a rexxer flash done although your problems have put me off a little now.

Don't let it put you off, here is the link to when I had my rexxerr flash done by Neil at Cornerspeed.

http://www.ukmonster.co.uk/monster/s...ad.php?t=50780
chris.p is offline   Reply With Quote
Old 24-08-2019, 11:30 AM   #32
Rrawlings
Member
 
Join Date: May 2019
Location: Bradford
Bike: M1100evo
Posts: 175
I have the sprocket. Thought I’d remove the cover to check it was the right one and the Allen heads rounded. Garage locked up. Will deal with it later
Rrawlings is offline   Reply With Quote
Old 24-08-2019, 01:15 PM   #33
Rrawlings
Member
 
Join Date: May 2019
Location: Bradford
Bike: M1100evo
Posts: 175
Had a double espresso and went back in. Tapped a t27 torx bit in with a copper mallet and the bolts are out. Correct sprocket so just need to get impact gun out and get it sorted now. I may do it in the morning. As promised I will report back when it’s done
Rrawlings is offline   Reply With Quote
Old 25-08-2019, 11:47 AM   #34
Rrawlings
Member
 
Join Date: May 2019
Location: Bradford
Bike: M1100evo
Posts: 175
Job done took me 45 mins this morning including going through the tin of bolts to find replacements for the sprocket cover. Made it a lot more civilised at lower speed and the acceleration in gear is even better than I expected it to be. Only had a short ride but for me well worth doing and would recommend it for £18 and about an hour at worst to do it. Thanks again for the advice guys
Rrawlings is offline   Reply With Quote
Old 25-08-2019, 05:33 PM   #35
Luddite
Registered User
 
Luddite's Avatar
 
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
Welcome to sixth gear!
Luddite is offline   Reply With Quote
Old 25-08-2019, 06:03 PM   #36
chris.p
Gold Member
 
chris.p's Avatar
 
Join Date: Mar 2004
Location: lincoln
Bike: No Bike Yet!
Posts: 876
Quote:
Originally Posted by Rrawlings View Post
Job done took me 45 mins this morning including going through the tin of bolts to find replacements for the sprocket cover. Made it a lot more civilised at lower speed and the acceleration in gear is even better than I expected it to be. Only had a short ride but for me well worth doing and would recommend it for £18 and about an hour at worst to do it. Thanks again for the advice guys

Your more than welcome fella
chris.p is offline   Reply With Quote
Old 25-08-2019, 07:47 PM   #37
Rrawlings
Member
 
Join Date: May 2019
Location: Bradford
Bike: M1100evo
Posts: 175
Quote:
Originally Posted by Luddite View Post
Welcome to sixth gear!
Haha yeah and welcome to no need to use the front wheel
Rrawlings is offline   Reply With Quote
Old 27-08-2019, 08:51 AM   #38
Uncle Bob
Registered User
 
Uncle Bob's Avatar
 
Join Date: Jan 2017
Location: Milton Keynes
Bike: M1100evo
Posts: 233
What sprocket did you buy mate?
Uncle Bob is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT. The time now is 10:58 PM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.