Top yoke pinch bolt torque 2000 M900sie

[rbt1548]

Cheers guys!

I agree that the 20mm is a big difference from the 5mm but the more I looked at reference and what my first 900 had it's forks set to, I decided to reset them to their original position, also it gives the 280mm stated in the manual. I also looked at the hoop setting and that seems to be at the standard position of not being raised.

I made note of the clicks on the Ohlins at the rear and counted the clicks on the rebound and compression settings, what did surprise me was the number of clicks available from fully clockwise to fully anti-clockwise, there are loads on both settings. I went onto the Ohlins site and got the setting up and mounting instructions, it gives base settings, 12 & 14 if I remember correctly, but it doesn't say how many clicks it should take to get from fully clockwise to fully, so I sent them an email to see if they can tell me.

Mr Gazza, where did you manage to get your 2000 manual?, I have a couple but not specifically a 2000 Sie one.

Thanks