UK Monster Owners Club Forum » .: Technical :. » Mods & How To's » Different handle bars.

Reply
 
Thread Tools Display Modes
Old 26-02-2019, 02:11 PM   #1
Kenb
Guest
 
Posts: n/a
Different handle bars.

Hi,
I’ve raised my bars by 40 mm, but still get a sore neck after an hours riding.
I have a pair of handle bars off a scrambler which I would like fitted.
Does anyone know of somebody in Manchester area that might undertake this work?
Bearing in mind the electrics will most likely need extending, along with other cables/ brake lines.
Tia; Ken.
  Reply With Quote
Old 26-02-2019, 03:50 PM   #2
Moco1961
Guest
 
Posts: n/a
I am sure the guys at Ducati Manchester could help you out Ken
  Reply With Quote
Old 26-02-2019, 04:27 PM   #3
Kenb
Guest
 
Posts: n/a
Mmmmm.

Quote:
Originally Posted by Moco1961 View Post
I am sure the guys at Ducati Manchester could help you out Ken
I will call them,but, not too sure they’ll say yes.
Thanks,Ken.
  Reply With Quote
Old 26-02-2019, 06:16 PM   #4
ChrisC2925
Registered User
 
ChrisC2925's Avatar
 
Join Date: Jan 2013
Location: Ormskirk
Bike: M600
Posts: 244
Just mention Jeff's name Ken & they will sort you out!
ChrisC2925 is offline   Reply With Quote
Old 27-03-2019, 12:19 PM   #5
Kenb
Guest
 
Posts: n/a
Smile

Monster went in on 7th March...no word yet.
Did mention Jeff’s name...they said...WhoTF Is Jeff?
Not biking weather for me yet, anyway.
Regards,Ken.

Last edited by Kenb; 27-03-2019 at 12:24 PM.. Reason: Spelling.
  Reply With Quote
Old 27-03-2019, 05:28 PM   #6
ChrisC2925
Registered User
 
ChrisC2925's Avatar
 
Join Date: Jan 2013
Location: Ormskirk
Bike: M600
Posts: 244
Quote:
Originally Posted by Kenb View Post
Monster went in on 7th March...no word yet.
Did mention Jeff’s name...they said...WhoTF Is Jeff?
Not biking weather for me yet, anyway.
Regards,Ken.
The one and only Geoff Wellesby - mention him again when you pick it up. He worked for Ducati Manchester
ChrisC2925 is offline   Reply With Quote
Old 13-05-2019, 08:20 PM   #7
Kenb
Guest
 
Posts: n/a
Hi,
Couldn’t get scrambler bars fitted to my M696,so, had to let the bike go and get something with a more friendly (For me) riding position.
Result is a Scrambler Classic 803.4 years old.
The front wheel is 1” dia bigger than the rear and I don’t like that, so was wondering if it would be okay to fit a wheel the same size as the rear one?
This would also slightly lower the seat height and suit me better.
Anybody know whether okay to do this, and which wheel might fit.
Regards,Ken.
PS. Is this query even allowed now I’m no longer a Monster owner?��
  Reply With Quote
Old 13-05-2019, 08:39 PM   #8
Mossleymonster
Registered User
 
Mossleymonster's Avatar
 
Join Date: Nov 2017
Location: Barnsley
Bike: M1100s
Posts: 239
Quote:
Originally Posted by Kenb View Post
Hi,
Couldn’t get scrambler bars fitted to my M696,so, had to let the bike go and get something with a more friendly (For me) riding position.
Result is a Scrambler Classic 803.4 years old.
The front wheel is 1” dia bigger than the rear and I don’t like that, so was wondering if it would be okay to fit a wheel the same size as the rear one?
This would also slightly lower the seat height and suit me better.
Anybody know whether okay to do this, and which wheel might fit.
Regards,Ken.
PS. Is this query even allowed now I’m no longer a Monster owner?��
Did you know you didn't like different size wheels before you bought them? Asking for a friend.
__________________
Always remember. Your home is at risk if you set fire to it.
Mossleymonster is offline   Reply With Quote
Old 13-05-2019, 08:49 PM   #9
Flip
Registered User
 
Flip's Avatar
 
Join Date: Mar 2010
Location: Beachtown
Bike: M900
Posts: 2,188
Quote:
Originally Posted by Kenb View Post
Hi,
Couldn’t get scrambler bars fitted to my M696,so, had to let the bike go and get something with a more friendly (For me) riding position.
Result is a Scrambler Classic 803.4 years old.
The front wheel is 1” dia bigger than the rear and I don’t like that, so was wondering if it would be okay to fit a wheel the same size as the rear one?
This would also slightly lower the seat height and suit me better.
Anybody know whether okay to do this, and which wheel might fit.
Regards,Ken.
PS. Is this query even allowed now I’m no longer a Monster owner?��
I am not sure why you say you don't like the idea of the front wheel being a slightly larger diameter to the rear- this is quite often the way with a lot of cruiser/urban style bikes, with off road bikes going even further up to a 21'' front and 18'' rear.

I would have thought that going down in size on the front may speed up the steering too much for that style of bike unless you alter the tyre size to compensate and then you're back to the rolling diameter of the standard set-up.

If you just want to lower the seat height there are a couple of more conventional ways of going about it.

Firstly, buy the low seat that is available from Ducati, easily changed and designed to fit:

https://www.ebay.co.uk/itm/351923511838?ul_noapp=true

Or go a slightly different route and fit a lowering kit like this:

https://www.wilbers-shop.de/en/Motor...html?year=2015

Remember though that the lowering kit will only lower the rear suspension and you may (or may not) need to pull the forks through the yokes to compensate and keep the geometry at the factory setting- this will of course lower the bike overall and reduce ground clearance as a result.

Personally, if you want the seat lower then buy the low seat option.
__________________
You're perfect, yes, it's true- But without me you're only you!
Flip is offline   Reply With Quote
Old 13-05-2019, 09:47 PM   #10
Kenb
Guest
 
Posts: n/a
Different sizes.

Quote:
Originally Posted by Mossleymonster View Post
Did you know you didn't like different size wheels before you bought them? Asking for a friend.
Yes, I knew, but the riding position was more important than two different wheels.
Probably me, but I’ve always felt the bigger wheel was harder for me to get round corners/ bends. But I can live with it, if I have to.
Ken.
  Reply With Quote
Old 13-05-2019, 10:01 PM   #11
Kenb
Guest
 
Posts: n/a
Lightbulb Lower

Quote:
Originally Posted by Flip View Post
I am not sure why you say you don't like the idea of the front wheel being a slightly larger diameter to the rear- this is quite often the way with a lot of cruiser/urban style bikes, with off road bikes going even further up to a 21'' front and 18'' rear.

I would have thought that going down in size on the front may speed up the steering too much for that style of bike unless you alter the tyre size to compensate and then you're back to the rolling diameter of the standard set-up.

If you just want to lower the seat height there are a couple of more conventional ways of going about it.

Firstly, buy the low seat that is available from Ducati, easily changed and designed to fit:

https://www.ebay.co.uk/itm/351923511838?ul_noapp=true

Or go a slightly different route and fit a lowering kit like this:

https://www.wilbers-shop.de/en/Motor...html?year=2015

Remember though that the lowering kit will only lower the rear suspension and you may (or may not) need to pull the forks through the yokes to compensate and keep the geometry at the factory setting- this will of course lower the bike overall and reduce ground clearance as a result.

Personally, if you want the seat lower then buy the low seat option.
Hi,
The seat is none standard (Mustang) so don’t know how that measures up to a factory seat, but it feels quite soft.
The front forks have been “Tuned?” And the rear shock is a Nitron, so, with all this I don’t know how it sits against a ‘Regular’ bike.
Don’t want to change the suspension.
Only got bike today so need a decent ride out to see how i feel with it.
Thanks for all replies. Ken.
PS. Bike is a Classic but it has Ali wheels.
PPS. It don’t look anywhere as nice as the Monster it replaced, but at least it’s a Ducati.

Last edited by Kenb; 13-05-2019 at 10:02 PM.. Reason: PPS.
  Reply With Quote
Old 14-05-2019, 12:14 AM   #12
Flip
Registered User
 
Flip's Avatar
 
Join Date: Mar 2010
Location: Beachtown
Bike: M900
Posts: 2,188
Quote:
Originally Posted by Kenb View Post
Hi,
The seat is none standard (Mustang) so don’t know how that measures up to a factory seat, but it feels quite soft.
The front forks have been “Tuned?” And the rear shock is a Nitron, so, with all this I don’t know how it sits against a ‘Regular’ bike.
Don’t want to change the suspension.
Only got bike today so need a decent ride out to see how i feel with it.
Thanks for all replies. Ken.
PS. Bike is a Classic but it has Ali wheels.
PPS. It don’t look anywhere as nice as the Monster it replaced, but at least it’s a Ducati.
I think you probably just need to get a few miles under your belt with it but depending on the previous owners' weight/riding style and whether they took a pillion regularly etc. you may find that the Nitron (if not the forks as well) may be sprung very differently to how it might need to be for you- so you may end up having to change some things anyway.
__________________
You're perfect, yes, it's true- But without me you're only you!
Flip is offline   Reply With Quote
Old 15-05-2019, 10:39 AM   #13
Kenb
Guest
 
Posts: n/a
Thumbs up ?

Quote:
Originally Posted by Flip View Post
I think you probably just need to get a few miles under your belt with it but depending on the previous owners' weight/riding style and whether they took a pillion regularly etc. you may find that the Nitron (if not the forks as well) may be sprung very differently to how it might need to be for you- so you may end up having to change some things anyway.
Hi,
Did 35 miles on bike yesterday.
Could do with some longer legs. Clutch seem either in or out(Nearly like a dog clutch). Front brake quite vicious when coming to final stop.
Riding position is really good for me.

I bought a Street Tamer Throttle tube (Not arrived yet as not told there would be
Customs charges, £30) as I’d read they might help with low speed throttle control.


Can those link type lowering kits be used on a classic Scrambler?
Thanks for all replies,Ken.
  Reply With Quote
Old 27-05-2019, 06:18 PM   #14
Kenb
Guest
 
Posts: n/a
Well....I took the end caps out of my Classic Scrambler handle bars and was surprised (Very!) ...to find they were held in with M6 Rawlplugs...is the normal?
Ken.
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:24 PM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.