Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 673 | Total Threads: 50,934 | Total Posts: 519,365 Currently Active Users: 1,113 (0 active members) Please welcome our newest member, Mozzer46 |
|
|
Thread Tools | Display Modes |
16-10-2018, 11:36 AM | #1 |
Guest
Posts: n/a
|
Removing 696 rear wheel nut.
How? Mine seems stuck. Breaker bar broke. The bike is in bits so can’t get it to anyone with a rattle gun. I’ve put a fair amount of Plus Gas on, but I think it’s just tight. Anyone near Maidstone got a mains powered gun :-)
|
16-10-2018, 12:48 PM | #2 |
Registered User
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 867
|
Only a rattle gun will them off, i very nearly snapped my breaker bar trying to get mine off. My mates snap on gun done it in seconds.
|
16-10-2018, 01:04 PM | #3 |
More Tools!
Join Date: Jun 2004
Location: Forres
Bike: Multiple Monsters
Posts: 297
|
After having the same issue with my EVO I bought one of these:
https://www.machinemart.co.uk/p/clar...impact-wrench/ Never looked back, it is superb and also comes with a few impact sockets. I was lucky enough to get one during their frequent Vat-Free promotions. Their website shows a shop in your town? You could also easily sell it on if the time comes
__________________
Boris from Forres Last edited by boris; 16-10-2018 at 01:07 PM.. |
16-10-2018, 01:04 PM | #4 | |
Registered User
Join Date: Feb 2009
Location: Chatham
Bike: Multiple Monsters
Posts: 714
|
Quote:
Mine will spin when tightening/loosening unless I have a socket on each end. If it doesn't undo with a breaker and doesn't spin when you try on one end it has seriously corroded or been massively over tightened. Where near Maidstone I have a couple of options and a free Sunday if your still stuck by then.
__________________
Sideways is the new forward! |
|
16-10-2018, 01:23 PM | #5 |
Guest
Posts: n/a
|
I fear massively over tight. I’m near to West Malling, Wateringbury to be exact. I’ll try the other end.
It’s standard thread right? Not backwards? |
16-10-2018, 01:24 PM | #6 |
Gold Member
Join Date: Mar 2004
Location: lincoln
Bike: No Bike Yet!
Posts: 876
|
Just a note, when you have removed the nut and want to reassemble the swinging arm, always use a small anount of Copperslip on the threads, this acts as a lubrcant and locking agent makng removle so much easier the next time.
|
16-10-2018, 01:26 PM | #7 |
.
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,733
|
696 has a conventional swingarm, not SSS, so shouldn’t be that tight (unless the last wheel change was done by ‘bodgett & scarper’ who gunned it on)
|
16-10-2018, 01:51 PM | #8 |
Guest
Posts: n/a
|
Got it off. Attacked the other side first (still had to stand on the bar) and then the other side came off easy. Great.
BUT... the axle is seized. Rubber mallet won’t shift it. So more Plus Gas and waiting. |
16-10-2018, 02:12 PM | #9 |
Registered User
Join Date: Feb 2009
Location: Chatham
Bike: Multiple Monsters
Posts: 714
|
That's good news on the nuts.
Mine was corroded tight in the bearings the first time I removed it. I now grease it up with a corrosion resisting grease and pull it when doing other work on the bike to make sure it doesn't happen again.
__________________
Sideways is the new forward! |
16-10-2018, 03:40 PM | #10 |
Registered User
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 867
|
Copper grease is great stuff but for spindle stuff get the proper red grease. Can't remember it's name but silkolene do it
|
16-10-2018, 03:41 PM | #11 |
Registered User
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 867
|
Silkolene Pro RG2 Grease
|
16-10-2018, 03:49 PM | #12 |
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
Glad you got those nuts off. Perhaps a heat gun on the axle might help to free it off?
I'll second what Boris said about an impact wrench. I used to struggle with the (172N/m) rear wheel nut on my Evo until I bought a cordless Clarke wrench from Machine Mart. Now I wouldn't be without it. I'd definitely recommend investing in one, either corded or cordless and also some dedicated impact sockets (normal chrome vanadium ones can shatter on an impact wrench). I don't know if you've removed the lower shock mounting bolt yet, but you may find that that's corroded too and an impact wrench may be the best way to tackle it. The allen head size is 8mm. I use these with my wrench: https://www.ebay.co.uk/itm/SEALEY-IM...9/263632167157 |
16-10-2018, 04:34 PM | #13 |
Registered User
Join Date: Feb 2009
Location: Chatham
Bike: Multiple Monsters
Posts: 714
|
I remembered how I got mine moving, one end of the axle has a longer thread than the other, I tightened the nut on that end making sure not to jam the nut on the end of the thread which pulled the axle a little to that side, then added spacers under the nut so I could keep pulling the axle out using the nut until it would move by hand.
__________________
Sideways is the new forward! |
16-10-2018, 05:06 PM | #14 |
Gold Member
Join Date: Mar 2004
Location: lincoln
Bike: No Bike Yet!
Posts: 876
|
|
|
|