My M750 Rebuild

30-06-2016, 03:53 PM

Can't help with the oil pipe as mine has electrical heaters, but the cable guide is attached (at least, on mine) to the r/h side carb as we look at it. It goes on the left side of the bowl, with the cable holders uppermost and obviously facing away from the carb. On mine, they were attached with 2 longer allen bolts than the rest.

Edit, just noticed your carbs are upside down in the photo. So either turn them over then follow the instruction, or fit them to the left (in the pic) carb, with the cable holder towards the bottom. It's fairly obvious once you marry the notch in the cable guide up to the idle screw.

30-06-2016, 03:53 PM	#1
RossObey01 Guest Posts: n/a	Can't help with the oil pipe as mine has electrical heaters, but the cable guide is attached (at least, on mine) to the r/h side carb as we look at it. It goes on the left side of the bowl, with the cable holders uppermost and obviously facing away from the carb. On mine, they were attached with 2 longer allen bolts than the rest. Edit, just noticed your carbs are upside down in the photo. So either turn them over then follow the instruction, or fit them to the left (in the pic) carb, with the cable holder towards the bottom. It's fairly obvious once you marry the notch in the cable guide up to the idle screw.