![]() |
Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact | ![]() |
![]() |
|
![]() |
![]() |
Registered
Members: 636 | Total Threads: 50,827 | Total Posts: 518,516 Currently Active Users: 1,098 (0 active members) Please welcome our newest member, jaraduke |
![]() |
|
![]() |
|
Thread Tools | Rate Thread | Display Modes |
![]() |
#1 |
Guest
Posts: n/a
|
First Service and few mods
Hi All
Finally i've successfully navigated to the M1100 pages - not so good at these Forum's so its taken me a while to find this section. Thought i'd post this to report on quality of Service and some worth mods others might be considering etc. I purchased my bike from JHP in Coventry, and so returned for the first service. Excellent Service and attention to the customer al round would be my summary - nothing too much bother on the day. Routine service was nothing to report and seemed reasonable value on its own - short time between booking in and ava space in the workshop. On the day after discussion, i settled for down sizing the front sprocket to improve town use (and over gearing generally) and for a billet JHP clutch slave cylinder to be fitted - to improve my control of the clutch essentially (i've reduce weight a little, and improve feel). That was no bother to do on the day, and part in stock. Whilst there, and work being done, i also opted to change the following bits, JHP open clutch cover (billet), DP red clutch pressure plate, black anodised clutch springs, and stainless bolts - hopefully that should all keep the area looking neat (ie no corrosion on mild steel parts), and it looks great together. Then added a DP billet oil cap in matching red. And finally, a clear tank pad. What is good about spending time in the shop whilst service is being done - is you get time to look at the parts (and nothing seems too much bother to show, demo, discuss) and what they look like on various bikes there, for example - i've pretty much settled on a none Carbon look for my bike, given i've got the matt silver and the shiny carbon clashes i think. I wanted the following also, - Termi/DP Titanium exhaust system (cans, with ecu and air filter) - DP tail tidy unit - JHP fork protectors - JHP billet sprocket (now this isn't an item which is ava for the M1100 due to differences - in engine cases etc -they only do a cardon item as yet. However, after discussion, they reckon they can re-machine an item from another fitment and get it re anodised), so looking forward to seeing that done -Considering black anodised replacement levels, not sure on the make here - not sure i've seen the ones i like (had Rizmola on my R6 before) -JHP billet fuel cap - quick release, in black anodised, Again, not an item done for the M1100 - but they will look into mod-ing another item - Not sure on frame protectors as yet, not sure i've something which will work with the look i thinking of (simple, and understated is the type of thing) So, couple hours at JHP this AM was a really good outcome, great service, helped me clear-up the direction i wanted to go in re-mods, spent some money, and decided where the next pennies will go. I must say, the bike goes great now, given i had all the clutch parts done and the sprocket (and a service, with re-tensioned chain) - its diff to isolate which things makes it some much better, but the clutch and transmission are a complete turn-around and it feels so much more natural to use now. The gearing is like day and night - such an improvement in the town and at low speed, and means you can extend the engine on the open road more too (this is a must do mod). I'm completely taken by the noise of the thing with the open clutch, sounds great. To be honest, i'm not so sure i need the Termis now. The overall sound of clutch, engine and exhaust might be spot on without the Termis now. It was nice to find a gap in the weather today too, got there and back (the long way round!) without getting wet - result! Bring on the spring i say :-) |
![]() |
![]() |
#2 |
No more Monster...
Join Date: Jan 2007
Location: London
Bike: Other Not a Ducati
Posts: 4,326
|
It sounds like you've sized up Ducati ownership perfectly...
__________________
J.JP ------------------------------- My Mum says, there's no such thing as Monsters. ![]() |
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
Hi All
I've been looking up brake / clutch levers for the Monster, i'm looking for full size - black - with red adjusters. I'm thinking rizoma or ASV so far (i know CRG and Pazzo are the popular ones) - hence thinking something different. Any thoughts on which might be best? Also, does anyone know if these things are easy to self fit? Any tips on the fitting - does it upset the clutch adjustment etc. Cheers in advance |
![]() |
![]() |
|
|