1993 M900 Cylinder Head Removal Advice

Darren69 · 20-07-2020, 11:47 AM

IIRC there is a way to tell if they are the later studs. Some were a different colour and I think may have had something stamped onto the end 'M'? If it's an early bike and not had them changed then it certainly worth considering I would say.They did fit them to the the later bikes but not sure when.

Had one on my '94 900SS go and it's a pain. The Baines Racing ones are waisted in the centre to allow for some more stretch so you can see when the barrels are off, but I'm not sure if the Ducati ones do.

20-07-2020, 11:47 AM	#9
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,029	IIRC there is a way to tell if they are the later studs. Some were a different colour and I think may have had something stamped onto the end 'M'? If it's an early bike and not had them changed then it certainly worth considering I would say.They did fit them to the the later bikes but not sure when. Had one on my '94 900SS go and it's a pain. The Baines Racing ones are waisted in the centre to allow for some more stretch so you can see when the barrels are off, but I'm not sure if the Ducati ones do. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode