UK Monster Owners Club Forum » .: Technical :. » Engines, Clutch, Gears » The 2 main frame bolts - 900ie / 900

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-10-2023, 07:51 AM   #1
900Rebuilder
Registered User
 
Join Date: Sep 2022
Location: Beeston
Bike: M900
Posts: 326
The 2 main frame bolts - 900ie / 900

Hi All,

Been busy doing lots of trial fitting on my 900 build as bits come back from powder coating and the local engineering place.

A quick question that I'd like info and hopefully advice on. I have a 900ie engine going into a 900 carb frame which fits fine with the known exception of the different sized bolts that hold the engine to the frame. I understand that typically the frame is drilled from 10mm to 12mm and the newer type bolts are then used which is I'd imagine no big deal, however on mine the rear bolt screws into a captive nut in the frame so cant easily be drilled out unless it was and then re-tapped to 12mm. Is this unique to early 900's as I thought it was just a long bolt with a nut / washer on the end of both?

Cheers,

Ben
__________________
Ducati Monster 900 - Yamaha tdr125 & dt200wr - Ford GPW
900Rebuilder is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT. The time now is 11:39 PM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.