Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 635 | Total Threads: 50,819 | Total Posts: 518,478 Currently Active Users: 1,052 (0 active members) Please welcome our newest member, Bunnyrides |
|
|
Thread Tools | Display Modes |
22-06-2020, 07:40 PM | #1 |
Guest
Posts: n/a
|
M900 Clutch Help
Hi guys,
So I've done a bit of a clutch overhaul on my 93 M900, but I have a feeling that something is not quite right. I've installed a Barnett clutch basket off a 1997 M900 that I used to own, as well as the plates from it which had very little use. I've also installed an Oberon slave cylinder, with the little insert on the pushrod, and I have a new master cylinder and lever on it too. I've bled the system and I'm getting pressure - the handle feels fine. I'm able to go through the gears but when I pull the clutch in when in gear the pressure plate rotates and grabs the stack when I move the bike - I can't remember if is supposed to do this. I dont think it should. Can someone please tell me if this is normal? Or if not, where is the first thing to check? Thank you! Last edited by Ross090; 22-06-2020 at 09:46 PM.. |
|
|