![]() |
Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact | ![]() |
![]() |
|
![]() |
![]() |
Registered
Members: 640 | Total Threads: 50,829 | Total Posts: 518,569 Currently Active Users: 1,003 (0 active members) Please welcome our newest member, Mrtom1100s |
![]() |
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Mar 2016
Location: oxford
Bike: M600
Posts: 131
|
![]() Hi there!
I have just picked up my old 1999 Monster 600 which has been sitting in a dry but unheated garage for 5 years. When I last used it it worked fine. All the clutch fluid had leaked from the slave so I have a very shiny new Oberon slave cylinder to fit this weekend ![]() I was planning on the following: - Remove tank and drain - Drain carbs using drain hoses - Fit tank and add fresh fuel - Drain some through the carbs - Fit new battery - Press go and crank until it maybe fires - If it doesn't then think again ![]() Is there anything else I need to do? I know it would be best to remove carbs etc but I am rubbish at that stuff...however if you think I could damage something then please let me know!!! Will update after the weekend...hopefully without a full engine rebuild post... Cheers! Ben ![]() |
![]() |
![]() |
|
|