Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 634 | Total Threads: 50,816 | Total Posts: 518,465 Currently Active Users: 954 (0 active members) Please welcome our newest member, simifeltham |
|
|
Thread Tools | Display Modes |
01-12-2019, 05:05 AM | #1 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,831
|
S4 not running
Ok im in Thailand now ,, S4 not good
so far i have drained the old fuel its pure Benzine and its ok ,, fuel pump is working and fuel lines are brand new ,, injectors are clean fuel is flowing bike started when injector cleaner and fuel blown down the inlets so its not immobiliser NEXT removed power commandrr ,, no different still not starting ,, checked all wiring connectors and , relays all good ..except the 3 pin connector from crank pickups to main loom its disintegrting after 19 years of heat and UV ,, ,, so remove connector and splice the 3 wires they are not insulated 2 are copper one is steel bike now starts sometimes runs ok on tickover and revs well and charging is working 14v,, but it is not reliable enough to ride ,, seems part of the problem is the crank sensor cable connector its an AMP junior power 3 pin plug and socket similar to the TPS on but in line male anf female need part numbers to order it all online anyone know if it requires proper connector to run or is a splice ok ????? or am I missing something,????? , the wiring loom seems a bit fragile too after 19 years in extreem heat ,, i also suspect an issue with wire to immobilier may be weak bike starts ok 2 03 times runs fine forv 10 mins switch off have a cup of tea ,, and then it may not start intil i wiggle a few wires ???
__________________
MONSTERMAN Last edited by jerry; 01-12-2019 at 05:08 AM.. |
|
|