Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 634 | Total Threads: 50,818 | Total Posts: 518,470 Currently Active Users: 421 (0 active members) Please welcome our newest member, simifeltham |
|
|
Thread Tools | Display Modes |
|
21-04-2011, 01:11 PM | #1 |
Guest
Posts: n/a
|
Help me please - S2R/ S4R/s owners!
Hi Guys/ gals,
I need a pretty big favour! Those of you with OEM fat bars could you measure the distance between the centre of the bolts or bolt holes on your risers please to determine if I can fit some on my top yoke (milled down 620 yoke). Cheers! |
21-04-2011, 02:25 PM | #2 |
Guest
Posts: n/a
|
can do it over the weekend....
|
21-04-2011, 06:02 PM | #3 |
Moderator
Join Date: Apr 2008
Location: Moreton-in-Marsh
Bike: M1100evo
Posts: 1,082
|
Just had a quick measure up and the centres are 69mm
__________________
IF ALL ELSE FAILS READ THE INSTRUCTIONS |
21-04-2011, 06:19 PM | #4 |
Guest
Posts: n/a
|
Thankyou rollo, but I meant the other way (oops my mistake) as in from one bolt to the other on a single riser, you wouldnt happen to have that would you?
|
21-04-2011, 07:11 PM | #5 |
Guest
Posts: n/a
|
Guys, I think I have it sussed: 47mm from the outer edge of the bolt hole to the other on each riser which is the same as my 620 but thanks again for your help, you're diamonds!!
|
|
|