Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 664 | Total Threads: 50,909 | Total Posts: 519,166 Currently Active Users: 1,194 (0 active members) Please welcome our newest member, nellie691 |
|
|
Thread Tools | Display Modes |
|
16-12-2023, 03:16 PM | #1 |
Registered User
Join Date: Jul 2014
Location: Portsmouth
Bike: M900
Posts: 1,518
|
Pre Injection bike South Hampshire?
Hi all
I've just come back from several weeks away for work and am getting to grips with several projects I had on the go before I had to leave unexpectedly. One of them is this Ducati Performance dash and revcounter that I'm mid-refurbishing ready to sell on: The rear housing was smashed, although I've got it up to an acceptable standard for use on a bike, but I still need to refinish the Carbon front plate and tidy up the wiring. I've realised however that I no longer have a pre-injection bike around to test it on to see if the revcounter actually works. The wiring loom 'T's into the connector to one of the IC ignitors on a Carbie bike to get it's signal: Is there anyone reasonably local that would be happy to let me plug this in just to see if it works? I'm just South of Petersfield, Hampshire.
__________________
Heaven doesn't want me, and Hell is afraid I'll take over. |
26-12-2023, 04:41 PM | #2 |
Registered User
Join Date: Jul 2014
Location: Portsmouth
Bike: M900
Posts: 1,518
|
Just a polite reminder about this.
Just need to plug it in and see if it works. Happy to provide a bottle of wine or similar if that helps. Thanks Nasher.
__________________
Heaven doesn't want me, and Hell is afraid I'll take over. |
26-12-2023, 05:49 PM | #3 |
Lord of the Rings
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,935
|
I'm not sure if your rev-counter wants a signal from a low or high tension cable? But surely any coil will provide either and I would have thought that any of your bikes could provide that? Obviously it's not going to be plug and play without the correct connectors, but you're only looking for a quick test so a bit of cable with bare ends should do the trick. Or am I missing something?
__________________
|
10-02-2024, 11:05 AM | #4 |
Registered User
Join Date: Jul 2014
Location: Portsmouth
Bike: M900
Posts: 1,518
|
Just a quick reminder about this request for help please.
Need an IC ignitor bike, Monster or SS, reasonably close to Petersfield Hants for me to just plug this DP M900 Tacho kit into to see if the Tacho itself works. I've got it ready to advertise, but don't know if it works: Thanks.
__________________
Heaven doesn't want me, and Hell is afraid I'll take over. |
|
|