Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 636 | Total Threads: 50,824 | Total Posts: 518,492 Currently Active Users: 491 (0 active members) Please welcome our newest member, jaraduke |
|
|
Thread Tools | Display Modes |
|
19-04-2011, 08:32 PM | #1 |
Junior ah to be young
Join Date: Nov 2007
Location: London
Bike: Multiple Monsters
Posts: 2,058
|
CF sprocket cover and short mud-guard.
Ok just found two bits I will not need so selling them.
A CF front sprocket cover - £20 A short mud-guard. This is where it gets tricky. It was not originaly for a monster. I had it modified to fit my old m750. I also had to have a small holl drilled in swing-arm, which then had to have been raised and threaded. However that depends on type of swing-arm some are flat so just a hole with thread is needed. Not that hard took my mechanic like 30 min. - £30
__________________
"I am Lucazade" |
20-04-2011, 06:04 PM | #2 |
Guest
Posts: n/a
|
Hey fella
I'm interest on the sprocket cover for sure if you still have it maybe the higher too if it fits Dave |
20-04-2011, 07:33 PM | #3 | |
Junior ah to be young
Join Date: Nov 2007
Location: London
Bike: Multiple Monsters
Posts: 2,058
|
Quote:
Do not understand the second part of you message "maybe the higher too if it fits"
__________________
"I am Lucazade" |
|
20-04-2011, 10:00 PM | #4 |
.
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,714
|
damn you autocorrect! (hugger?)
|
20-04-2011, 10:15 PM | #5 |
Junior ah to be young
Join Date: Nov 2007
Location: London
Bike: Multiple Monsters
Posts: 2,058
|
Crap did not think about it
As said that hugger will fit only if you make an extra hole in swing-arm to mount it. Depending from swing-arm it might be a hole + raising it abit (or you could use alloy spacer) or just hole. In either case threaded hole. If you go for spacer idea then drill a hole, thread it and use correct spacer/spacers.
__________________
"I am Lucazade" |
|
|