UK Monster Owners Club Forum » .: Technical :. » Mods & How To's » 2 into 1 exhaust

Reply
 
Thread Tools Display Modes
Old 11-02-2024, 10:32 PM   #1
Bitza
Silver Member
 
Bitza's Avatar
 
Join Date: Jul 2006
Location: Poole
Bike: M900ie
Posts: 508
2 into 1 exhaust

OK all, so what is the thinking on 2 into 1 exhaust systems, specifically on 1100 2v engines? They seemed to be favoured on the 750cc F1 type era bikes. Potential weight saving if nothing else.
To quote the Bonzos "to save some more weight off came my left leg.... watch out there's a monster coming. (sorry about that, but I've never found an apt excuse to quote that before). Anyway please discuss the 2 into 1 bit.
__________________
Bitza
Bitza is offline   Reply With Quote
Old 12-02-2024, 08:12 AM   #2
900Rebuilder
Registered User
 
Join Date: Sep 2022
Location: Beeston
Bike: M900
Posts: 326
No idea on performance gains other than weight but personally prefer the looks and sound of two into two.
__________________
Ducati Monster 900 - Yamaha tdr125 & dt200wr - Ford GPW
900Rebuilder is offline   Reply With Quote
Old 12-02-2024, 10:59 AM   #3
Nasher
Registered User
 
Nasher's Avatar
 
Join Date: Jul 2014
Location: Portsmouth
Bike: M900
Posts: 1,518
I believe certain model years of the 600SS came with a 2 into 1, but it didn't last long.
__________________
Heaven doesn't want me, and Hell is afraid I'll take over.
Nasher is offline   Reply With Quote
Old 12-02-2024, 11:21 AM   #4
Dukedesmo
Registered User
 
Dukedesmo's Avatar
 
Join Date: Sep 2010
Location: Leics
Bike: M900
Posts: 2,894
Don't know if there is any performance benefit or otherwise? but obviously a weight saving (so a performance benefit).

Utopia has a single exhaust on his M750, I think for lightness and a 'less is more' philosophy.

Otherwise I'm pretty sure all (old) Monsters had 2 exhausts probably for aesthetic reasons? but, as above I think some of the smaller engined SS models came with a single can.
__________________
M900, 916, LeMans II.

Dukedesmo is offline   Reply With Quote
Old 12-02-2024, 01:31 PM   #5
utopia
No turn left unstoned
 
utopia's Avatar
 
Join Date: Jun 2010
Location: leicester
Bike: M750
Posts: 4,559
Quote:
Originally Posted by Dukedesmo View Post
Utopia has a single exhaust on his M750, I think for lightness and a 'less is more' philosophy.
Exactly so.

I can't imagine there's a huge difference in performance between the two styles.
After all, on a monster each cylinder exhausts through both silencers so even though its a twin-can system it must function much like a 2 into 1 but with two silencers on the outlet from the collector.
Add to that the uneven firing of the 90 deg motor which must make the timing of the reflected exhaust pulses almost impossible to optimise if they're "mixed".
Whereas in a "conventional" twin-can system each cylinder has its own individual pipe and silencer, making it much simpler to tune the reflected pulses.
The early racing MVs, Hondas, Benellis etc. all had individual pipes for each cylinder, presumably for the above reason, but then again they were straight through pipes and so there was considerably less weight penalty from a four pipe system than there would be on a road bike running silencers.

On a road bike there will be much more weight to be shed by losing one silencer (with its heavy innards) and in my opinion this is well worth taking advantage of.

I like the practical simplicity of a single can system as it makes access for cleaning and maintenance a little easier.
I also find mechanical simplicity appealing in its own right in a purist kind of way.
And personally speaking, I find the asymmetry of a single can system visually appealing, particularly in combination with the matching asymmetry of the fore and aft, 90 deg spaced cylinders of the Ducati motor.

On the downside, where one can is doing all of the silencing for the entire system (remember that each cylinder exhausts through both silencers simultaneously in the std system), I imagine its harder to keep the noise level down. That has been my experience anyway, albeit fairly limited.

To sum up, performance gains are of lesser importance to my mind but the loss of weight and both the mechanical and the visual simplicity make the single can system my personal firm favourite.

For those that are wondering ... my own M750 runs a big bore, thin-wall, 2-1 high-level Sil Moto system originally intended for an M900 but cut down to suit the dims of the 750 engine.
It weighs bugger-all and it shows off the rear end nicely (without resort to the abomination of a single sided swingarm).
Coupled with its short..ish, straight through carbon can and a homemade db killer, I struggle to keep it quiet.
utopia is offline   Reply With Quote
Old 12-02-2024, 12:49 PM   #6
crawsue
Bronze Member
 
crawsue's Avatar
 
Join Date: Nov 2016
Location: Glasgow
Bike: M1100evo
Posts: 276
IMHO the sound is more “booming” from twin cans, my 696 with Leo Vincis made a more pleasing sound than my Evo with the Remus…..but there must be a fair weight saving ….
crawsue is offline   Reply With Quote
Old 12-02-2024, 01:40 PM   #7
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,963
There will certainly be a weight saving and little drag too.
I reckon you should be able to coax a hp out of it with a bit of thought, or possibly make it worse without?

With what little I know, it's all down to the exhaust pulses and how they join together in a common tube.
On an L twin the pulses are uneven, two close together and then a big gap on each cycle.
I reckon that if you were to make the trailing pulse arrive at the junction a bit later by using a longer pipe for that cylinder, it might even things up and make the flow in the pipes better.
If you got it wrong and gave the first pulse the longer pipe it would bring them closer together with adverse affects.
No idea which fires first or second? Hopefully its the vertical that's first as it would be difficult to lengthen that one, whereas the front pipe has already got a head start.
Maybe the standard system already addresses the above as they have different length headers for each pot as far as the collector.

Note that on the 1200 they Siamese, and they have obviously gone to convoluted lengths (See what I did there?) to get the rear pipe longer.

Conversely I think it's the Cagiva Elefant that has nearly no rear pipe at all!

There must be something about this in Phil Irvins "Tuning for speed" if you can find a copy
__________________
Mr Gazza is offline   Reply With Quote
Old 12-02-2024, 02:02 PM   #8
Dukedesmo
Registered User
 
Dukedesmo's Avatar
 
Join Date: Sep 2010
Location: Leics
Bike: M900
Posts: 2,894
Note that pretty much all the newer Ducati Superbikes and race bikes use a single silencer.

Probably for packaging and cost reasons but they wouldn't be doing it if they couldn't get at least the same performance as with a pair.
__________________
M900, 916, LeMans II.

Dukedesmo is offline   Reply With Quote
Old 12-02-2024, 11:16 PM   #9
Nasher
Registered User
 
Nasher's Avatar
 
Join Date: Jul 2014
Location: Portsmouth
Bike: M900
Posts: 1,518
By coincidence today this popped up:
https://www.ebay.co.uk/itm/196241312...temCondition=4

Nothing to do with me.
__________________
Heaven doesn't want me, and Hell is afraid I'll take over.
Nasher is offline   Reply With Quote
Old 13-02-2024, 09:21 AM   #10
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,963
Is it called Staintune because it's stained black?

The pipes on that look about the same length by eye, so it should retain the lumpy beat of an L twin. I notice that someone has taken some trouble to try and get rid of some manifold heat too, with the serrated retainers, unlike that supposedly Ti item posted recently.

The seller says he thinks it will fit Monsters too, but alas I'm sure he's wrong as the swinging arms differ where they are cross braced and the rear pipe clashes if you try and swap Monster and SS systems. Good design though.

If you're thinking of having a go yourself Mike (I assume you are?) You could do worse than starting with a Monster system and some bends from here > https://www.everyexhaustpart.com/car...nds-and-elbows
__________________
Mr Gazza is offline   Reply With Quote
Old 13-02-2024, 09:54 AM   #11
Kato
Dismantled
 
Kato's Avatar
 
Join Date: Feb 2006
Location: East Molesey
Bike: Multiple Monsters
Posts: 2,242
In a Nutshell
Advantages obtained or not with any configuration vary greatly according to the shape, length, and curves of the pipes.
However
2-into-1
Generally, more common on smaller, engine bikes where the advantage is power increase and the power delivery, especially at low RPMs.
2-into-1 exhausts often offer a better-balanced airflow which can result in more torque and a smoother idle.
2-into-2
Are more common on Big Sports bikes, and perform best at high RPMs, making them best for top-end performance, but leaving a little emptiness at lower RPMs.
__________________
"Political correctness is just intellectual colonialism and psychological fascism for the creation of thought crime"

Kato is offline   Reply With Quote
Old 13-02-2024, 11:01 AM   #12
RichardDDuke
Registered User
 
Join Date: Oct 2022
Location: Bedford
Bike: Other Ducati
Posts: 141
Am toying with the idea of fitting a 2:1 exhaust on my SS Monster hybrid, using the down pipes from a Scrambler and fabricating a short link tube to a single "silencer".

Not really after top end performance, so want to try it out to see how it turns out.

Wish me luck ...
RichardDDuke is offline   Reply With Quote
Old 13-02-2024, 12:13 PM   #13
Kato
Dismantled
 
Kato's Avatar
 
Join Date: Feb 2006
Location: East Molesey
Bike: Multiple Monsters
Posts: 2,242
If not after max performance and don't mind dropping an HP or two then go with what you think looks good, worst case will mean needing to sort out fueling

Biggest mistake people make is thinking bigger the bore the better
__________________
"Political correctness is just intellectual colonialism and psychological fascism for the creation of thought crime"

Kato is offline   Reply With Quote
Old 13-02-2024, 08:22 PM   #14
utopia
No turn left unstoned
 
utopia's Avatar
 
Join Date: Jun 2010
Location: leicester
Bike: M750
Posts: 4,559
Quote:
Originally Posted by Kato View Post
Biggest mistake people make is thinking bigger the bore the better
Just for the record, I wouldn't have chosen the bigger bore (50mm) headers of my system.
But the rest of the system was exactly what I wanted so I put up with the bigger bore.
Mind you, although I cringe slightly at my shallowness here, I have to admit that the 50mm headers do look cool.


Also, on the silencing capabilities of one can vs two, I said this ....

Quote:
Originally Posted by utopia View Post
On the downside, where one can is doing all of the silencing for the entire system (remember that each cylinder exhausts through both silencers simultaneously in the std system), I imagine its harder to keep the noise level down. That has been my experience anyway, albeit fairly limited.

Coupled with its short..ish, straight through carbon can and a homemade db killer, I struggle to keep it quiet.
And yes, its true that my system is not the quietest but its certainly not twice as loud as a two can system. Far from it.
My earlier comment may have given an overstated impression.

On weight comparison, my previous system was std headers with high level link pipes to a pair of DP titanium straight-through cans.
Weight comparisons are as follows ...

std headers = 2.52kg
DP titanium can plus high level link pipe 2,41kg x2
Total = 7.34kg

Sil Moto system
Complete pipework inc high level link pipe = 2.12kg
Carbon can = 1.14kg
Total = 3.26 kg

As you can see there is a considerable weight saving of over 4kg, even compared to a system using twin, super-lightweight cans.
Mind you, direct comparisons are always tricky and I should point out that although the Sil Moto headers use bigger bore pipe, they are much thinner wall and as the above figures show, slightly lighter than the std, small bore headers.

Although I do value the weight saving (its hard to shake off Capo's influence) but for me, the simplicity of the single can system, both visually and mechanically, is the overall deciding factor.
On the other hand, those who's personal preference is for twin-can symmetry may disagree.
utopia is offline   Reply With Quote
Old 13-02-2024, 12:27 PM   #15
RichardDDuke
Registered User
 
Join Date: Oct 2022
Location: Bedford
Bike: Other Ducati
Posts: 141
Pipes I'm hoping to use are off a 800 Scrambler, so pipe diameter / bore shouldn't be too dissimilar to the original 900ss ones ...
RichardDDuke is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:25 PM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.