Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 637 | Total Threads: 50,828 | Total Posts: 518,550 Currently Active Users: 909 (0 active members) Please welcome our newest member, Snakedog |
|
|
Thread Tools | Display Modes |
06-05-2007, 07:33 PM | #1 |
Guest
Posts: n/a
|
Leaking Tank
I have a tank leak at the hinge plate
I've been reading through all the previous threads/posts and it seems one or two of you have experienced this problem, and solved it in different ways. Some folks have suggested welding/brazing, whilst others think that a coating of Petseal, POR-15 or something similar is sufficient. I'm considering going down the brazing route, then treating it with POR-15. Has anyone else had the plate brazed? I'm just after some opinions...good idea or not? Anything special I need to do to prep etc? Any advice as always would be greatly appreciated. TIA Last edited by eonan; 06-05-2007 at 07:36 PM.. |
|
|