Brake caliper joing bolt torque

14-02-2017, 12:25 PM

Does anyone know the torque value of the bolts that link the to halves of the calliper together for a Brembo P4.32K front calliper off a Monster 1100?
I decided to replace the seals and split the callipers to do it, however there is no torque value for this in the workshop manual....Help please

Joe

jonzi · 14-02-2017, 01:34 PM

http://www.apriliaforum.com/forums/s...orque-settings

Quote:

Cheers for that, from what i can figure it is 25 nm with a m8 bolt.

jerry · 15-02-2017, 09:03 PM

when i do them its 28-30 nm

16-02-2017, 09:57 AM

Thanks guys, was going to refer to the generic size/torque value if I couldn't find anything. I've done them at 26NM. Shall see today when I fill the system. 👍🏻

14-02-2017, 12:25 PM	#1
M1100_Red Guest Posts: n/a	Brake caliper joing bolt torque Does anyone know the torque value of the bolts that link the to halves of the calliper together for a Brembo P4.32K front calliper off a Monster 1100? I decided to replace the seals and split the callipers to do it, however there is no torque value for this in the workshop manual....Help please Joe

15-02-2017, 09:03 PM	#3
jerry Old Git Join Date: May 2006 Location: Cricklade Bike: Multiple Monsters Posts: 2,831	when i do them its 28-30 nm __________________ MONSTERMAN

16-02-2017, 09:57 AM	#4
M1100_Red Guest Posts: n/a	Thanks guys, was going to refer to the generic size/torque value if I couldn't find anything. I've done them at 26NM. Shall see today when I fill the system. 👍🏻