UK Monster Owners Club Forum » .: Warm Up Area :. » A nice place for new members to say hello » Another new member back on a Ducati

Reply
 
Thread Tools Rate Thread Display Modes
Old 02-10-2019, 03:27 PM   #1
Graham04
Registered User
 
Join Date: Aug 2019
Location: Swansea
Bike: M620ie
Posts: 15
Another new member back on a Ducati

Hi Everyone, Back on a monster after a long break. Owned a 900 in 96 and loved it. But many years later ( this August ) an old mate showed me an old photo of me and my young son stood by the Duke. Juices started, ebay and auto trader searched . I picked a fairly cheap 94 600 with low mileage and lots of history. The only real issue being fork seals weeping. Used it for a few weeks and decided to change them. The speedo drive was jammed on and broke taking it off, the old rubber brake pipe was almost worn through and the pads had been contaminated with fork oil. Apart for the speedo drive its a worthwhile strip down and a perfect time for a braided hose and new pads. Anyone out there with an original still on beware. Graham
Graham04 is offline   Reply With Quote
Old 02-10-2019, 05:31 PM   #2
CefnCoed
Guest
 
Posts: n/a
Welcome and hope you enjoy being back on a DUCATI
  Reply With Quote
Old 02-10-2019, 07:07 PM   #3
Moco1961
Guest
 
Posts: n/a
Welcome back Graham, you picked the right time of year for a bit of maintenance, weathers not so good eh!
  Reply With Quote
Old 03-10-2019, 09:56 AM   #4
mickj
Registered User
 
mickj's Avatar
 
Join Date: Jun 2018
Location: Clevedon
Bike: M1200s
Posts: 565
Welcome to the forum Graham.
__________________
Keep the rubber side down. Mick
mickj is offline   Reply With Quote
Old 03-10-2019, 03:04 PM   #5
Uncle Bob
Registered User
 
Uncle Bob's Avatar
 
Join Date: Jan 2017
Location: Milton Keynes
Bike: M1100evo
Posts: 233
Hello and welcome
Uncle Bob is offline   Reply With Quote
Old 04-10-2019, 08:45 AM   #6
Nickj
Too much time on my hands member
 
Nickj's Avatar
 
Join Date: Jun 2007
Location: Forest Of Dean
Bike: S2r
Posts: 3,206
Ohh .... The top of the slippery slope there Graham, now it'll 'just' jobs for ever ... I think I'll just change that and that

Enjoy, it's nice to have a little winter project to keep you out of mischief
__________________
"The final measure of any rider's skill is the inverse ratio of his preferred Traveling Speed to the number of bad scars on his body." Song of the sausage creature
Nickj is offline   Reply With Quote
Old 04-10-2019, 08:32 PM   #7
Graham04
Registered User
 
Join Date: Aug 2019
Location: Swansea
Bike: M620ie
Posts: 15
Well its almost back together, as soon as the speedo drive arrives it will be back on with the wheel and bleed the brake. The seals were a doddle but the Pyramid stuff which came with the bike, don't seem up to much. The dust seals just drop out, a few strips of ptfe tape seems to have cured it for the moment. If they drop out with use I might try grip glue. Graham
Graham04 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:58 PM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.