Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 673 | Total Threads: 50,934 | Total Posts: 519,365 Currently Active Users: 831 (0 active members) Please welcome our newest member, Mozzer46 |
|
|
Thread Tools | Rate Thread | Display Modes |
20-05-2018, 03:39 PM | #1 |
Registered User
Join Date: Sep 2012
Location: gloucester
Bike: M900ie
Posts: 133
|
Rear Suspension set-up
Went for a 'bimble' yesterday with my IAM senior observer friend Andy and was complaining about the 'potholes' etc.
After following me for several miles he suggested that my rear suspension seemed to be rather 'restricted' - not taking in the road conditions. He then took the Monster for a run and suggested re-setting the Ohlins shock. M900ie Dark 2000 Anyone set up the Ohlins on this model? 109 31 95 279 unit. I only weigh 10st 4 lbs and 5' 6'' height (same as I left school in 1957 ) as if you wanted to know that !!!!! Any advice would be appreciated. No I will not be packing up biking or selling my Monster. Thanks, Chris |
20-05-2018, 04:10 PM | #2 |
Moderator
Join Date: Apr 2008
Location: Moreton-in-Marsh
Bike: M1100evo
Posts: 1,083
|
__________________
IF ALL ELSE FAILS READ THE INSTRUCTIONS |
20-05-2018, 08:09 PM | #3 |
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
Check the static sag (using the guidance that rollo provided) and also the dynamic sag, i.e. with you and your riding gear on board. You'll probably be able to get the correct static sag (5-15mm) but, if you can't get within the range 25-35mm (or about 25% of the available travel) by adjusting the preload with you on board, then you'll benefit from a lighter spring.
If your sag is ok, check your compression damping and try reducing it if it's adjustable. I'm just about to try a softer spring on my Evo as I feel the 115N/mm may be too firm for my riding style. The new spring should arrive this week. I'll post a report on that and also the Sealey spring compressor that I've also bought shortly... |
20-05-2018, 08:31 PM | #4 | |
Gold Member
Join Date: Mar 2004
Location: lincoln
Bike: No Bike Yet!
Posts: 876
|
Quote:
|
|
20-05-2018, 08:34 PM | #5 |
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
|
20-05-2018, 09:25 PM | #6 |
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
You could be right, Chris.
My spring's free length is, I think, 170mm and I reckon there should be over 180mm clearance with the collars wound back, sooo... Anyone want to buy a spring compressor?! |
21-05-2018, 12:03 AM | #7 | |
Registered User
Join Date: Nov 2017
Location: Barnsley
Bike: M1100s
Posts: 239
|
Quote:
__________________
Always remember. Your home is at risk if you set fire to it. |
|
22-06-2018, 05:43 PM | #8 |
Registered User
Join Date: Sep 2012
Location: gloucester
Bike: M900ie
Posts: 133
|
Many thanks Rollo - downloaded the OHLINS manual and set it up for my 'lightweight' frame - huge improvement - 'pot holes' I love them.
|
|
|