High level carbon Termi's

15-04-2015, 08:46 PM

Hi there,

Due to a slight change in plans, for my M900sie, I am selling the high level carbon Termi's to fund other exhausts.

I bought them off a lovely chap on here, and they are in very good nick. The straps, springs, link pipes, new foil backed decals, carbon heel guards and mounting bracket are included. I have had alternative mounting brackets made, that clamp around the 'D' pillion handles. I have more photos, so let me know if you are interested and I can email them.

I bought them a few months ago for £285 but I am looking for £250 please. If no interest, then its off to auction I suppose.

Cheers, Bill.

Darren69 · 15-04-2015, 09:00 PM

Are they the 50mm dia type?

15-04-2015, 09:05 PM

Just had a measure and yes, they are the 50mm type. I don't know if this is the norm or not but the cans are oval in shape too,

Cheers.

Darren69 · 15-04-2015, 09:24 PM

Ok, I may be interested. Only mine and the other sets I've seen don't have the weld half way up the link pipe like yours do but the heat shields are pukka. for sure.

15-04-2015, 09:32 PM

OK mate, no worries. Keep me posted.

cheers.

Darren69 · 15-04-2015, 09:39 PM

If these are the bigger 50mm that will fit the full Termignoni system then I will take them, but if as I suspect that they maybe the smaller ones then they are no good for me.

15-04-2015, 10:01 PM

Don't know if these will help mate...
The first one is the inlet side of the can and the other 2 are of the outlet side of the can, I tried to show both the inner and outer diameter.
Cheers, Bill.

Darren69 · 16-04-2015, 08:25 AM

Thanks Bill, Yes, they are the 45mm ones so too small they won't fit my collector so no use to me I'm afraid. Will fit the stock collector of the Mie bikes and S4 though.

16-04-2015, 11:49 AM

Ahh, apologies mate for my ignorance. I thought the 50mm was applicable to the outlet end!! Oops.

Thanks for the info though. Hopefully someone on here can make use of them.

16-04-2015, 10:16 PM

These are now on eBay too.

15-04-2015, 08:46 PM	#1
WAB78 Guest Posts: n/a	High level carbon Termi's Hi there, Due to a slight change in plans, for my M900sie, I am selling the high level carbon Termi's to fund other exhausts. I bought them off a lovely chap on here, and they are in very good nick. The straps, springs, link pipes, new foil backed decals, carbon heel guards and mounting bracket are included. I have had alternative mounting brackets made, that clamp around the 'D' pillion handles. I have more photos, so let me know if you are interested and I can email them. I bought them a few months ago for £285 but I am looking for £250 please. If no interest, then its off to auction I suppose. Cheers, Bill.

15-04-2015, 09:00 PM	#2
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,038	Are they the 50mm dia type? __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

15-04-2015, 09:24 PM	#4
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,038	Ok, I may be interested. Only mine and the other sets I've seen don't have the weld half way up the link pipe like yours do but the heat shields are pukka. for sure. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

15-04-2015, 09:39 PM	#6
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,038	If these are the bigger 50mm that will fit the full Termignoni system then I will take them, but if as I suspect that they maybe the smaller ones then they are no good for me. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

16-04-2015, 08:25 AM	#8
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,038	Thanks Bill, Yes, they are the 45mm ones so too small they won't fit my collector so no use to me I'm afraid. Will fit the stock collector of the Mie bikes and S4 though. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

15-04-2015, 09:05 PM	#3
WAB78 Guest Posts: n/a	Just had a measure and yes, they are the 50mm type. I don't know if this is the norm or not but the cans are oval in shape too, Cheers.

15-04-2015, 09:32 PM	#5
WAB78 Guest Posts: n/a	OK mate, no worries. Keep me posted. cheers.

15-04-2015, 10:01 PM	#7
WAB78 Guest Posts: n/a	Don't know if these will help mate... The first one is the inlet side of the can and the other 2 are of the outlet side of the can, I tried to show both the inner and outer diameter. Cheers, Bill.

16-04-2015, 11:49 AM	#9
WAB78 Guest Posts: n/a	Ahh, apologies mate for my ignorance. I thought the 50mm was applicable to the outlet end!! Oops. Thanks for the info though. Hopefully someone on here can make use of them.

16-04-2015, 10:16 PM	#10
WAB78 Guest Posts: n/a	These are now on eBay too.