Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 673 | Total Threads: 50,934 | Total Posts: 519,365 Currently Active Users: 831 (0 active members) Please welcome our newest member, Mozzer46 |
|
|
Thread Tools | Rate Thread | Display Modes |
27-04-2009, 07:31 PM | #1 |
Guest
Posts: n/a
|
S4RS missfire?
Has anyone had the problem of missfiring? most obvious at low revs, which is annoying especially when on round a bouts.
|
27-04-2009, 08:04 PM | #2 |
Guest
Posts: n/a
|
not that I've noticed
|
27-04-2009, 09:27 PM | #3 |
everyone gets home safe
Join Date: Jun 2007
Location: London
Bike: S4Rs
Posts: 933
|
nope. Have you had the TPS done?
__________________
There is no depth to that mans talent... Sorry, there is no END to the depth of that mans talent. |
28-04-2009, 09:24 AM | #4 |
Guest
Posts: n/a
|
Two things:
1. Is it a miss fire or a back fire? 2. How is it on idle once warmed up? |
28-04-2009, 01:33 PM | #5 |
Guest
Posts: n/a
|
thanks jerry, whats a TPS?
Also thanks head muppet, definatly not a back fire, total loss of control at the throttle only for a split second though, but enough to annoy espcially as i said when in slow moving traffic or tight round a bout. Its been behaving this way for a year and two services now, thought fiting a stubby on the end of the cat might have changed things...but no. Any pointers appreciated. anthony. |
28-04-2009, 01:39 PM | #6 |
Guest
Posts: n/a
|
It sounds as though it's not a missfire, but a flat spot.
My S2R did this very badly after I altered the exhaust & was especially noticable on roundabouts when either just feathing the throttle or slight excelleration. I reckon your bike is running to lean & possibly the TPS needs setting up, book it in to your local dealer & ask them to check the CO% & adjust the TPS, that will probably cure it. |
28-04-2009, 04:03 PM | #7 |
Guest
Posts: n/a
|
thanks for the advice, will talk to ducati manchester to see if they recognise the problem.
|
28-04-2009, 10:45 PM | #8 |
everyone gets home safe
Join Date: Jun 2007
Location: London
Bike: S4Rs
Posts: 933
|
Tps == throttle position sensor
__________________
There is no depth to that mans talent... Sorry, there is no END to the depth of that mans talent. |
30-04-2009, 11:20 AM | #9 |
Guest
Posts: n/a
|
I have this problem at the moment - I've spoken to a couple of people about it and it happens when the temp gauge gets above 85C. Only very low down and only when opening the throttle otherwise it runs totally fine. Problem started when I had termis fitted with race ecu and air filter. Sometimes it makes the bike cut out completely. I spoke with Tim Blakemore and he reckons a PC would cure the problem without having to refit the lambda sensors. Apparently he can map each cylinder right across the rev range so I might give the credit card a bashing as it aint cheap!
|
26-05-2009, 12:35 PM | #10 |
Guest
Posts: n/a
|
I think i noticed this problem yesterday, only did it twice, it was very hot at the time!!! What has everyone done about it?
|
22-09-2022, 04:51 PM | #11 |
Registered User
Join Date: May 2013
Location: London
Bike: S4Rs
Posts: 50
|
Hi all,
sorry to revive such an old thread, but I've been having the exact same symptoms on my 2006 S4Rs. I bought it last year and the fuel mapping was all over and it was impossible to ride. Then my mechanic took it for remapping and the bike feels great at 40-60-90 mph, but at low speeds and only when the engine is properly heated up (85C plus) I get constant flat spots. Is re-mapping again a solution then? Apart from being annoying, is it actually bad for the bike in any way? Thank you! |
23-09-2022, 01:29 PM | #12 |
Moderator
Join Date: Apr 2008
Location: Moreton-in-Marsh
Bike: M1100evo
Posts: 1,083
|
Your best bet i think is if you have non standard exhaust/cans get a REXXER remap it will get rid of all the bad running and smooth it all out.
__________________
IF ALL ELSE FAILS READ THE INSTRUCTIONS |
23-09-2022, 02:52 PM | #13 |
Registered User
Join Date: May 2013
Location: London
Bike: S4Rs
Posts: 50
|
Thank you, rollo22
After a super quick research, I understand that Rexxer remap process is as follows: 1. Fill in a simple ish form before buying the Rexxer Evo unit (I don't think I need the Pro, right?) 2. Get the unit, connect to the bike, download the current map 3. Email the downloaded file to Rexxer and get the map back 4. Upload the map onto the Rexxer unit and then onto the bike That sounds very straightforward and easy, is it so? My technical skill is super low and the only work I do on my bike is purely cosmetic, I don't even change the oil and the break pads myself, but this job sounds a bit too simple... Suspiciously so... Thanks! |
23-09-2022, 03:50 PM | #14 |
Lord of the Rings
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,963
|
I would try and stretch your mechanical skills to changing the spark plugs. You might be surprised at how much a fresh set will crispen it up. Mine typically seem to go off at about 6000 miles, but not always.
If that makes no difference, I'd get the injectors cleaned and after that think again about a re-map if there is no difference. BTW, it's no good re-mapping or dyno-ing unless the plugs, injectors and valves are all spot on.
__________________
|
23-09-2022, 05:30 PM | #15 | |
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
Quote:
|
|
|
|