UK Monster Owners Club Forum » .: Technical :. » Mods & How To's » Seat Cowl fitting brakets/kits

Reply
 
Thread Tools Display Modes
Old 28-10-2008, 01:10 PM   #1
Johnny_E
Guest
 
Posts: n/a
Question Seat Cowl fitting brakets/kits

Does anybody know the part nos for the fitting kit to fit a seat cowl? Just bought a carbon one - but need to order the necessary bits to clamp it on with.

Oh... unless anyone has one lying around 2nd hand of course that they'd sell.

John
  Reply With Quote
Old 28-10-2008, 01:27 PM   #2
Shandy
Guest
 
Posts: n/a
If you mean the two brackets that hold the seat cowl to the seat they are this for an M600 but can't see why they would be different,

Left Hand:- 827.1.097.1A
Right Hand:- 827.1.096.1A

Would be worth a call to a friendly parts man like Craig at Motorapido to check, he gives 10% for us members as well if you ask

Cheers,

Shandy
  Reply With Quote
Old 29-10-2008, 08:24 AM   #3
Johnny_E
Guest
 
Posts: n/a
Thanks Shandy... just what I needed.

John
  Reply With Quote
Old 13-11-2010, 06:29 PM   #4
popelli
Guest
 
Posts: n/a
has anybody got the dimensions of these brackets so I can make some up ?
  Reply With Quote
Old 27-11-2010, 11:33 PM   #5
popelli
Guest
 
Posts: n/a
problem solved

spoke to the guys at the local independant shop and they loaned me the brackets off one off their personal bikes to copy

nice to see that old school type shops still exist
  Reply With Quote
Old 27-11-2010, 11:44 PM   #6
utopia
No turn left unstoned
 
utopia's Avatar
 
Join Date: Jun 2010
Location: leicester
Bike: M750
Posts: 4,559
Assuming you haven't had a cowl fitted before (or else you'd already have the brackets) I think its worth smoothing any roughness from the underside of the cowl before you fit it. And/or maybe sticking something soft over it.
My bike has a scuffed rear seat section due to this, and it looks messy whenever you take the cowl off for pillion or luggage.
The two thumbscrew bolts (same as on the toolkit cubbyhole) that hold the cowl on drop out easily too.
utopia is offline   Reply With Quote
Old 27-11-2010, 11:50 PM   #7
popelli
Guest
 
Posts: n/a
Quote:
Originally Posted by utopia View Post
Assuming you haven't had a cowl fitted before (or else you'd already have the brackets) I think its worth smoothing any roughness from the underside of the cowl before you fit it. And/or maybe sticking something soft over it.
My bike has a scuffed rear seat section due to this, and it looks messy whenever you take the cowl off for pillion or luggage.
The two thumbscrew bolts (same as on the toolkit cubbyhole) that hold the cowl on drop out easily too.

thanks for the warning - would never have thought of the scuffing of the seat

re thumb screws I use spring washers everywhere
  Reply With Quote
Old 28-11-2010, 12:03 AM   #8
utopia
No turn left unstoned
 
utopia's Avatar
 
Join Date: Jun 2010
Location: leicester
Bike: M750
Posts: 4,559
Glad to be of assistance.

Thinking it through a bit more....the front and back edges may dig in and make lines in the seat.
The padding idea would tend to avoid this.
.....as would not fitting the cowl too low anyway, on the slotted holes in the brackets, but the padding sounds a better cure to me.
Maybe that stuff they sell for putting underneath tailpacks etc. ?
utopia is offline   Reply With Quote
Old 28-11-2010, 12:07 AM   #9
popelli
Guest
 
Posts: n/a
Quote:
Originally Posted by utopia View Post
Glad to be of assistance.

Thinking it through a bit more....the front and back edges may dig in and make lines in the seat.
The padding idea would tend to avoid this.
.....as would not fitting the cowl too low anyway, on the slotted holes in the brackets, but the padding sounds a better cure to me.
Maybe that stuff they sell for putting underneath tailpacks etc. ?
bike will never be used 2 up anyway and cowl unlikely to ever come off so its all academic
  Reply With Quote
Old 28-11-2010, 09:41 AM   #10
Scotty
Guest
 
Posts: n/a
I had a cowl with a rectangular shaped piece of padding to prevent scratches, and now I have a rectangular shaped indent in the saddle instead. :doh
  Reply With Quote
Old 28-11-2010, 03:29 PM   #11
Dookbob
Guest
 
Posts: n/a
I must confess that I think the monster seat looks much better without the cowl.
  Reply With Quote
Old 28-11-2010, 03:36 PM   #12
Gordon H
Guest
 
Posts: n/a
Don't forget spring washers....... one of the sloted bolts dropped off mine last week. I was about 2/3rds of a rotation on the remaining bolt away from losing the cowl.......

  Reply With Quote
Old 23-01-2011, 04:52 PM   #13
popelli
Guest
 
Posts: n/a
Quote:
Originally Posted by popelli View Post
problem solved

spoke to the guys at the local independant shop and they loaned me the brackets off one off their personal bikes to copy

nice to see that old school type shops still exist
finally got around to making the brackets, dead easy when you have something to copy

they came out spot on
  Reply With Quote
Old 29-01-2011, 05:06 PM   #14
popelli
Guest
 
Posts: n/a
has going to post a drawing with the dimensions for these but file size is too large

anybody know how to reduce the file size?
Attached Images
File Type: jpg DSCN0358.jpg (30.2 KB, 21 views)
  Reply With Quote
Old 29-01-2011, 05:20 PM   #15
gary tompkins
1/2 man - 1/2 pogo-stick
 
gary tompkins's Avatar
 
Join Date: Aug 2002
Location: Dartford, Kent
Bike: M900ie
Posts: 7,241
I made a set for trike out of 2mm alloy sheet, but just used a simple 'L' shape rather than copy the triangular profile of the originals. Fitted and worked just as well, and a bit quicker to make into the bargain.
__________________
GT
Fully paid up member of the S.A.S. (Scottoiler Appreciation Society) 27,000 miles on original chain - and still going strong!
gary tompkins is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:02 PM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.