Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 636 | Total Threads: 50,823 | Total Posts: 518,489 Currently Active Users: 1,068 (0 active members) Please welcome our newest member, jaraduke |
|
|
Thread Tools | Display Modes |
24-03-2011, 06:25 PM | #1 |
Guest
Posts: n/a
|
Dodgy electrics!
Can anyone help please? I stripped the rear lights from my 2002 600 monster to chop the tail but when I refitted the lights nothing at the rear end worked? the fronts were fine? I did the normal thing, wiggle the wires all the way along but this only made things worse and now the dash lights and front indicators have stopped too! The bike runs fine, and the dipped and main headlight work??
any help would be greatly received. |
24-03-2011, 07:04 PM | #2 |
Guest
Posts: n/a
|
Maybe caught or trapped (or hopefully not cut through) a wire so check for damage and check your fuses as it sounds as though a fuse may be blown
|
24-03-2011, 11:58 PM | #3 |
1/2 man - 1/2 pogo-stick
Join Date: Aug 2002
Location: Dartford, Kent
Bike: M900ie
Posts: 7,241
|
Blown fuses would get my vote as well
__________________
GT Fully paid up member of the S.A.S. (Scottoiler Appreciation Society) 27,000 miles on original chain - and still going strong! |
25-03-2011, 04:21 AM | #4 |
Guest
Posts: n/a
|
Cheers chaps! Half day Friday at work, so will check it all out in the sunshine this afternoon!
Thanks for the help. |
25-03-2011, 06:51 AM | #5 |
Guest
Posts: n/a
|
Check the grey connector on the loom. Clips onto frame behind rh side panel..... other than that like these guys said......
|
25-03-2011, 06:51 PM | #6 |
Guest
Posts: n/a
|
Fuse gone but indicators still not working, everything else ok. Try again tomorrow!
DSC_1937.jpg DSC_1936.jpg |
25-03-2011, 07:11 PM | #7 |
Guest
Posts: n/a
|
Check the earth they connect to good.
|
25-03-2011, 09:08 PM | #8 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,831
|
check that any bullets or conectors have become loose they may appear connected but not make contact
__________________
MONSTERMAN |
17-04-2011, 07:54 AM | #9 |
Guest
Posts: n/a
|
Electrics?
Hi, still not working?? new flasher relay fitted too?
Does anyone have a good wiring diagram? the one in the hand book is not detailed enough, I need to know if i've wired the bullets up the right way round?? Any help would be appreciated.. |
17-04-2011, 08:01 AM | #10 |
Moderator
Join Date: Apr 2008
Location: Moreton-in-Marsh
Bike: M1100evo
Posts: 1,082
|
Take them off completly and come down to Ducati Aylsbury.
http://www.ukmonster.co.uk/monster/s...ad.php?t=40430
__________________
IF ALL ELSE FAILS READ THE INSTRUCTIONS |
|
|