Wanted a unbroken oil feed plate M900

Albie · 01-11-2015, 03:26 PM

Just an ask if anyone has a decent unbroken oil feed plate. Same part number on vertical as horizontal. Mine still works but corners broken off and would like to replace it as going to a lot of effort painting and cleaning the engine up.

Albie · 17-11-2015, 07:41 PM

Bump still wanted 1 off if anyone has one not needed.

Albie · 07-02-2017, 05:29 PM

Bumping this again if anyone has one spare from a barrel not used. Or worst case scenario I can buy a blank cover one from a watercooled bike but it needs drilling and tapping if anyone has the correct size tap that could do for me.

utopia · 08-02-2017, 09:19 AM

Are these hard to get hold of then, Albie ?
Or is it just that the price is extortionate ?
You seem to have been after one for a while.

Albie · 08-02-2017, 09:30 AM

I should really check again but they are not a part on new bikes as these were oil line feeds external . They are still available as blanks . I just not been doing anything for a year and now just starting to get my act together as its 25 years monster next year so something to celebrate. Only just got riding again last week on the Scrambler and last ride was last march before I got wed. Life has been so busy with family and grandkids getting time with them I would have missed and the sad loss of my mother but now in a better place for her. I just need to get organised and get the plan moving and get the frame painted the CORRECT colour.. The powdercoat is not right as much as I had hoped it was. And need to get my tank back from Big Oz with the dents pulled out as best he could to get a respray and sell the other decent one.
All its missing now is correct early exhausts which I will never find.

09-02-2017, 07:05 PM

Stein Dinse list them at 22 Euro: http://www.stein-dinse.biz/eliste/?s...0156b40g&lg=en
And no I am not selling my 1993 OEM M900 exhausts either......

01-11-2015, 03:26 PM	#1
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,033	Wanted a unbroken oil feed plate M900 Just an ask if anyone has a decent unbroken oil feed plate. Same part number on vertical as horizontal. Mine still works but corners broken off and would like to replace it as going to a lot of effort painting and cleaning the engine up. __________________ http://albies93m900.blogspot.co.uk/

17-11-2015, 07:41 PM	#2
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,033	Bump still wanted 1 off if anyone has one not needed. __________________ http://albies93m900.blogspot.co.uk/

07-02-2017, 05:29 PM	#3
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,033	Bumping this again if anyone has one spare from a barrel not used. Or worst case scenario I can buy a blank cover one from a watercooled bike but it needs drilling and tapping if anyone has the correct size tap that could do for me. __________________ http://albies93m900.blogspot.co.uk/

08-02-2017, 09:30 AM	#5
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,033	I should really check again but they are not a part on new bikes as these were oil line feeds external . They are still available as blanks . I just not been doing anything for a year and now just starting to get my act together as its 25 years monster next year so something to celebrate. Only just got riding again last week on the Scrambler and last ride was last march before I got wed. Life has been so busy with family and grandkids getting time with them I would have missed and the sad loss of my mother but now in a better place for her. I just need to get organised and get the plan moving and get the frame painted the CORRECT colour.. The powdercoat is not right as much as I had hoped it was. And need to get my tank back from Big Oz with the dents pulled out as best he could to get a respray and sell the other decent one. All its missing now is correct early exhausts which I will never find. __________________ http://albies93m900.blogspot.co.uk/

08-02-2017, 09:19 AM	#4
utopia No turn left unstoned Join Date: Jun 2010 Location: leicester Bike: M750 Posts: 4,546	Are these hard to get hold of then, Albie ? Or is it just that the price is extortionate ? You seem to have been after one for a while.

09-02-2017, 07:05 PM	#6
DrD Guest Posts: n/a	Stein Dinse list them at 22 Euro: http://www.stein-dinse.biz/eliste/?s...0156b40g&lg=en And no I am not selling my 1993 OEM M900 exhausts either......