Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 673 | Total Threads: 50,934 | Total Posts: 519,364 Currently Active Users: 345 (0 active members) Please welcome our newest member, Mozzer46 |
|
|
Thread Tools | Rate Thread | Display Modes |
15-08-2020, 10:16 PM | #1 |
Guest
Posts: n/a
|
small issue
Hi to everyone, this is my first post and I'm asking for help.
I have completely rebuilt my M750 into a cafe racer. The small issue im having is it stutters when in top gear around 65mph. Everything electrical is new and it revs as it should in all other gears. I think its a fueling issue. Has anyone removed the vacuum type fuel pump and fitted a electric pump, if so which one have you used ? Any thoughts would be greatly received |
15-08-2020, 10:38 PM | #2 |
Lord of the Rings
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,963
|
The vacuum pumps can be rebuilt with new parts, but they usually cause priming problems and therefore poor starting rather than high speed supply.
If you have done away with the grey triangular plastic pods in the frame either side, it can upset the running at certain speeds, and also bizarrely at certain angles of side winds. Oh, and welcome to the club btw..
__________________
|
15-08-2020, 10:49 PM | #3 |
Guest
Posts: n/a
|
Thanks Gazza, that was a really good guess. i still have them so ill put them on an go for a ride tomorrow, fingers crossed as its a real issue when overtaking.
|
15-08-2020, 11:13 PM | #4 |
Lord of the Rings
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,963
|
Their function is to allow the vent pipes from the carbs to end in still air, so hopefully you can remember which pipes it was that were in the pods originally, as I couldn't help you with that I'm afraid.
Good luck, hope it works.
__________________
Last edited by Mr Gazza; 16-08-2020 at 09:45 AM.. Reason: Added a 'p' so you didn't try and put pies in the pods! |
16-08-2020, 05:51 AM | #5 | |
Guest
Posts: n/a
|
Quote:
Would be great to see your bike .....and you of course |
|
16-08-2020, 10:17 AM | #6 |
Registered User
Join Date: Mar 2010
Location: Beachtown
Bike: M900
Posts: 2,188
|
Welcome along- we need pictures but you’ll need a hosting site to post them here.
Yep I agree with Gazza’s suggestion of the grey pods- without them it can give a feeling if pulsing when on a steady cruising throttle. Locating the tubes in some still air should cure it but you say it’s an issue when asking for more fuel when over taking which isn’t usually a symptom- is 65mph a bit slow for top gear on a 750?
__________________
You're perfect, yes, it's true- But without me you're only you! |
16-08-2020, 10:33 AM | #7 |
Registered User
Join Date: Jun 2018
Location: Clevedon
Bike: M1200s
Posts: 565
|
Welcome to the forum Craig.
__________________
Keep the rubber side down. Mick |
16-08-2020, 01:54 PM | #8 |
Guest
Posts: n/a
|
Thanks
Thank Chaps, Ive just fitted one of the grey pods(lost the other) but ive joined the both pipes into one to test it out the fix. Just been out and its perfect !!!
Thanks for the Advise and i will definitely meet up with you all, think i owe pint or two Ill try and get a few pictures on this afternoon, I'm quite pleased with how its turned out. I went to the super-bike factory in Macclesfield yesterday with a couple of mates and genuinely didn't see a bike i would have wanted instead. Though there was loads there in the new building. |
16-08-2020, 02:20 PM | #9 |
Lord of the Rings
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,963
|
Nice one..
I'm virtually teetotal but I accept chocolate Hobnobs.. If you want to ditch the pod(s) again all you have to do is find a location with still air for the ends of the pipes. I think others have done it, but I don't run carbs anymore, so I can't suggest a place. You will do much worse than riding out to meet the North-West gang, they're a nice bunch as mis-fits go..
__________________
|
|
|