Hi everyone!

24-03-2006, 05:38 PM

I finally got a monster, courtesy of my lovely fiancee, after a couple of years of drooling over them. I previously had a little Yam SRX400 which was tiny in comparison and no good for keeping up with the ol' man's R1.
Still getting the hang of standing up on tiptoes when I stop, and looking forward to warmer weather so I can get out riding it more!

Albie · 24-03-2006, 05:45 PM

Well done you. Theres loads of ladies in the same situation as you.And plenty of mods to lower it. Prob some blokes have short legs too.God gave me long legs. Have fun

Pedro · 24-03-2006, 05:53 PM

Welcome and good choice!!

Ped

24-03-2006, 06:08 PM

Welcome to the group.

This is amazing, so many new members, I never realised that so many of the human race had such great taste.

Anyway, as I was trying to say.......

24-03-2006, 06:38 PM

Hello...welcome aboard

gary tompkins · 24-03-2006, 06:58 PM

Hi Jane,

I see you are also into the rally scene so might bump into you this season?

24-03-2006, 07:12 PM

well done take it on some twisty B roads and you will have great fun

29-03-2006, 01:33 PM

Hello and welcome....I was seduced by monsters too...and my boyfriend must take all the credit...

Hope youre having fun with it...I'm a tall thing so dont have the tip toe situation, but sure you can get it adjusted..unless you like the tip toe look..lol

Byeee, Splinters.

29-03-2006, 02:02 PM

Hi ya and welcome!

You're only 2 mins down the road from Windchaser, Will and Bladerunner who are really nice people - I'll be sure to let them know you're about as they don't often get to log on here.

29-03-2006, 09:15 PM

Hi there and welcome...good choice, im another short lady person...its all about the tiptoes for me, which is quite interesting when i stop on a camber without realising...but i guess thats half the fun that the tallies will never get to understand....enjoy your bike!

29-03-2006, 09:32 PM

Hi Jane - I am also a short person, but don't like the tiptoe thing too much as it's a bit on the undignified side when you put your foot in a pothole and fall over.

Both my M600 and the current (slightly dented) S2R have been lowered. PM me if you need any advice.....

29-03-2006, 09:35 PM

Thanks all! Gary, may well bump into you at a rally, it's going to be a busy year for us this year so aren't going to get to as many as we would like but intend to make up for it next year!
Hi Nim, I did the camber thing on my previous bike which was smaller than the monster, definitely an interesting experience - when I take the bike out now I have to take the longer route up to the main road because the camber at the junction just outside my house is lethal! It all adds spice to the riding experience I suppose...
Jane.

gary tompkins · 30-03-2006, 12:12 PM

Hi Jane, as others have said lowering is an easy option on most monsters. A reduction of at least 20 - 25mm should be possible by dropping the front forks through the jokes and adjusting/modifying the rear suspension linkage, with more available by cutting the seat foam down and recovering.

You need to check clearance under the bars though, as the forks will foul at the top if dropped through too much, and you will obviously loose a little ground clearance on pegs & cans. The trick is to try and lower both ends by a similar measurement or you could effect the handling. I'm sure someone on the forum has done all of this to a 620ie before?

30-03-2006, 12:27 PM

Quote:

Originally Posted by Jane

I finally got a monster, courtesy of my lovely fiancee, after a couple of years of drooling over them. I previously had a little Yam SRX400 which was tiny in comparison and no good for keeping up with the ol' man's R1.
Still getting the hang of standing up on tiptoes when I stop, and looking forward to warmer weather so I can get out riding it more!

Hi - from Will in St.Ives (Cambs - that is)

31-03-2006, 02:06 PM

Hi Will, will keep my eyes open for you when riding over your way!

Mrs Soup, your reply wasn't showing when I posted my reply just below it, sorry if it looks like I was ignoring you there! I certainly would consider getting the bike lowered properly, but He Who Pays is worried that it may invalidate the warranty so he'd rather it wasn't done. He did arrange for the shop to soften the suspension and fit crash bungs though.

Jane.

24-03-2006, 05:38 PM	#1
Jane Guest Posts: n/a	Hi everyone! I finally got a monster, courtesy of my lovely fiancee, after a couple of years of drooling over them. I previously had a little Yam SRX400 which was tiny in comparison and no good for keeping up with the ol' man's R1. Still getting the hang of standing up on tiptoes when I stop, and looking forward to warmer weather so I can get out riding it more!

24-03-2006, 05:45 PM	#2
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,033	Well done you. Theres loads of ladies in the same situation as you.And plenty of mods to lower it. Prob some blokes have short legs too.God gave me long legs. Have fun __________________ http://albies93m900.blogspot.co.uk/

24-03-2006, 05:53 PM	#3
Pedro Ciao, come stai? Join Date: Apr 2003 Location: Somewhere Bike: Multiple Monsters Posts: 4,157	Welcome and good choice!! Ped __________________ Monster 1200R! KTM 990 SuperDuke

24-03-2006, 06:58 PM	#6
gary tompkins 1/2 man - 1/2 pogo-stick Join Date: Aug 2002 Location: Dartford, Kent Bike: M900ie Posts: 7,241	Hi Jane, I see you are also into the rally scene so might bump into you this season? __________________ GT Fully paid up member of the S.A.S. (Scottoiler Appreciation Society) 27,000 miles on original chain - and still going strong!

29-03-2006, 01:33 PM	#8
Splinters Guest Posts: n/a	Heellooo Hello and welcome....I was seduced by monsters too...and my boyfriend must take all the credit... Hope youre having fun with it...I'm a tall thing so dont have the tip toe situation, but sure you can get it adjusted..unless you like the tip toe look..lol Byeee, Splinters.

24-03-2006, 06:08 PM	#4
bad-yeti Guest Posts: n/a	Welcome to the group. This is amazing, so many new members, I never realised that so many of the human race had such great taste. Anyway, as I was trying to say.......

24-03-2006, 06:38 PM	#5
eonan Guest Posts: n/a	Hello...welcome aboard

24-03-2006, 07:12 PM	#7
sage Guest Posts: n/a	well done take it on some twisty B roads and you will have great fun

29-03-2006, 02:02 PM	#9
Chappers Guest Posts: n/a	Hi ya and welcome! You're only 2 mins down the road from Windchaser, Will and Bladerunner who are really nice people - I'll be sure to let them know you're about as they don't often get to log on here.

29-03-2006, 09:15 PM	#10
Nim Guest Posts: n/a	Hi there and welcome...good choice, im another short lady person...its all about the tiptoes for me, which is quite interesting when i stop on a camber without realising...but i guess thats half the fun that the tallies will never get to understand....enjoy your bike!

29-03-2006, 09:32 PM	#11
Mrs Soup Guest Posts: n/a	Hi Jane - I am also a short person, but don't like the tiptoe thing too much as it's a bit on the undignified side when you put your foot in a pothole and fall over. Both my M600 and the current (slightly dented) S2R have been lowered. PM me if you need any advice.....

29-03-2006, 09:35 PM	#12
Jane Guest Posts: n/a	Thanks all! Gary, may well bump into you at a rally, it's going to be a busy year for us this year so aren't going to get to as many as we would like but intend to make up for it next year! Hi Nim, I did the camber thing on my previous bike which was smaller than the monster, definitely an interesting experience - when I take the bike out now I have to take the longer route up to the main road because the camber at the junction just outside my house is lethal! It all adds spice to the riding experience I suppose... Jane.

30-03-2006, 12:12 PM	#13
gary tompkins 1/2 man - 1/2 pogo-stick Join Date: Aug 2002 Location: Dartford, Kent Bike: M900ie Posts: 7,241	Hi Jane, as others have said lowering is an easy option on most monsters. A reduction of at least 20 - 25mm should be possible by dropping the front forks through the jokes and adjusting/modifying the rear suspension linkage, with more available by cutting the seat foam down and recovering. You need to check clearance under the bars though, as the forks will foul at the top if dropped through too much, and you will obviously loose a little ground clearance on pegs & cans. The trick is to try and lower both ends by a similar measurement or you could effect the handling. I'm sure someone on the forum has done all of this to a 620ie before? __________________ GT Fully paid up member of the S.A.S. (Scottoiler Appreciation Society) 27,000 miles on original chain - and still going strong! Last edited by gary tompkins; 30-03-2006 at 12:15 PM..

31-03-2006, 02:06 PM	#15
Jane Guest Posts: n/a	Hi Will, will keep my eyes open for you when riding over your way! Mrs Soup, your reply wasn't showing when I posted my reply just below it, sorry if it looks like I was ignoring you there! I certainly would consider getting the bike lowered properly, but He Who Pays is worried that it may invalidate the warranty so he'd rather it wasn't done. He did arrange for the shop to soften the suspension and fit crash bungs though. Jane.