Searching for a bracket to fit a high mounted exhaust

[spuggy]

Originally Posted by Foggy

I don't expect I'll need a bolt longer than 60mm so hopefully all should be ok.

I'd SWAG that, on the bottom-left hanger (the longest bolt used on the DP kit), the distance from the front of the bush housing in the hanger to the front edge of the prop-stand bracket, with the DP spacers fitted, seems to be around 45mm.

So the length of the bolt you'd need would be that measurement, plus:

• the thickness of the prop-stand bracket (less locating relief/countersink), and
• the length of the thread necessary to screw into the crankcase (and support the bike on the prop-stand).
• the added thickness of the washer accepting the low-profile socket cap head

You could be right around needing a 60-65mm bolt for that usage, maybe even 70mm.. Measurement will be key.

Not to say that low-profile socket caps in that length aren't available - just that a 3 minute search on Flea Bay turned up a UK supplier offering ones up to 60mm..