UK Monster Owners Club Forum - View Single Post

slob · 23-11-2019, 10:37 AM

Did it run okay with no clocks before you plugged them in?
My track bike (based on 03 M1000) uses a FIM ECU (no immobilzer) and runs fine with or without clocks. It does still have the ‘aerial’ plugged in, which might be worth trying if you still have the connector on your loom.
I’m puzzled that plugging a set of clocks in could re-enable the immobilizer.
I’d email Avanti Race Parts for advice on Webber-Marelli ECU issues, as he’s very knowlegable about the firmware/software.

23-11-2019, 10:37 AM	#3
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,712	Did it run okay with no clocks before you plugged them in? My track bike (based on 03 M1000) uses a FIM ECU (no immobilzer) and runs fine with or without clocks. It does still have the ‘aerial’ plugged in, which might be worth trying if you still have the connector on your loom. I’m puzzled that plugging a set of clocks in could re-enable the immobilizer. I’d email Avanti Race Parts for advice on Webber-Marelli ECU issues, as he’s very knowlegable about the firmware/software.