|
Although I'm not familiar with your model of bike , most Ducatis ....the slave cylinder is held on with three allen key screws....the way to extract the slave cylinder piston is to top up the master cylinder with fluid, remove the three allen keys which hold the slave cylinder onto the engine and pull it outwards and you'll see the end of the pushrod shaft,then gently pump it and the piston should pop out..be very careful..wear gloves as the fluid is good at stripping paint and not kind to your hands...Hopefully that master cylinder could be the same as on several other Ducati models.If it is then a seal should be readily available.
I could be wrong as I've never worked on an 1100 EVO monster....hope this is of some help to you .Let me know how you get on.
Cheers, adie851
|