|
So I got hold of a Regina link and it fits BUT my chain tool can't burr the rivets. In fact the rivets have flattened the spike on the tool! This has been used on numerous did chins. Now that I have fitted the 14t sprocket and refitted the chain it is at the limit of adjustment. Rideable but no further adjustment so I will be going for a new set. I found a site that deals with _Regina chains and it suggests that the Regina tool (I assume its a drift) should be given a "sharp tap with a hammer". I think perhaps it'll need a good belt with a hammer. All I can think of is some sort of drift with a concave face that will burr the rivet edges and make the link safe o I wonder if the link is not "soft"
|