Quote:
Originally Posted by 350TSS
Utopia - Not my dymags they have studs and nuts - mine were for an S4 not an M900 although I specified a 520 chain and sprockets
|
Quote:
Originally Posted by 350TSS
Utopia I am now worried I have a clearance problem on the SA , but it can wait until I install the SA and rear wheel - better to be forewarned though
|
Hmmm ... I would have thought the rear wheel would be the same for both an S4 and an M900, both having the double sided swingarm.
(and just in case you were wondering, despite my bike being a 750, it has an M900 ally swingarm and wider, M900 rear wheel).
I suppose they may have changed the design, but I would be a little surprised at that.
Anyway, sorry to be the harbinger of worry.
I've just measured my bike and I have about 12mm clearance between the outer face of the sprocket and the inner face of the swingarm, if that helps.
That's on the original, Talon sprocket as supplied by Dymag, but my replacement Renthall looks to be the same (I had wondered if it was slightly counterbored, but no).