Update time:
- New HiFlo air filter
- New HiFlo oil filter and oil
- New plugs
- New Motobatt battery
- New Exact belts. Tensioner bolts were way tight! WD40 and let them sit for an hour - was worried about rounding them.
- Cranked it with plugs out after adding a bit of oil to top end. Turned over nicely
New Oberon clutch cylinder. Installed it with the extension piece. You could feel the spring being compressed as the 3 bolts were tightened so not sure if I really needed that bit. Bled it (took ages!) and will try it on the road hopefully.
Now just need fuel...I hope
Only slight issue is the fuel hoses. 1 length from tank to filter and 1 length from filter to vacuum tap. Both quite long and really struggling to tuck them up under the tank...was thinking of making them way shorter...what do you think?
Cheers!