UK Monster Owners Club Forum - View Single Post

Luddite · 31-08-2019, 06:52 PM

Your 696 runs the same standard plugs as my Evo, i.e. NGK DCPR8E with a 0.7-0.8mm gap tightened to 20Nm.

You shouldn't need to change the heat rating because of the Termi but, if you want to 'upgrade', you could do what I did and fit iridium plugs, NGK DCPR8EIX with a 0.9-1.0mm gap.

There are a couple of points to note if you do run iridium plugs; check out posts #4 & #8 here: http://www.ukmonster.co.uk/monster/s...ad.php?t=54154

31-08-2019, 06:52 PM	#2
Luddite Registered User Join Date: Aug 2011 Location: Southampton Bike: M1100evo Posts: 2,465	Your 696 runs the same standard plugs as my Evo, i.e. NGK DCPR8E with a 0.7-0.8mm gap tightened to 20Nm. You shouldn't need to change the heat rating because of the Termi but, if you want to 'upgrade', you could do what I did and fit iridium plugs, NGK DCPR8EIX with a 0.9-1.0mm gap. There are a couple of points to note if you do run iridium plugs; check out posts #4 & #8 here: http://www.ukmonster.co.uk/monster/s...ad.php?t=54154