[Lozzo]

I recently purchased a used nose cone/fairing for my M600, it's the early type with the little lip that comes down over the top of the headlamp. Problem is, I have no fitting kit for it and have no idea what the fitting kit should look like. I did have the same nose cone on the bike before I crashed it, but that one had been previously damaged and I made my own mountings.

Looking at the replacement fairing and offering it up to the bike I'm assuming there is a bracket each side that mounts to the front of the top yoke and something on each headlamp bracket that locates in the moulded in 'hooks' on the lower part of the fairing.

Would one of you kind people be able to photograph your mountings so I have an idea of what I need to fabricate if I can't find the correct OE kit please?

Thanks in anticipation.