[Luddite]

Originally Posted by Albie

I'm just looking for a front brake one just in case I need one later. That's a 16mm plenty of rears

There was some discussion here regarding PS16 spares

http://www.ukmonster.co.uk/monster/s...d.php?p=582859

This from that thread:

Originally Posted by Luddite

I think your m/c is a PS16 isn't it? If that's the case then I've never managed to find a rebuild kit for that particular size; PS11 - yes, PS13 - yes, PS15 even - fine. But PS16 kits seem conspicuous by their absence.

This thread from the Paso forum contains some useful info. and says that the rubber boot from the PS15 can be used on the PS16:

http://forums.ducatipaso.org/viewtopic.php?f=1&t=8289

It's a bit extravagant but, if you're desperate for the dust boot and can't source it separately, you could use one from a PS15 repair kit. I think this is the right one:

https://www.ebay.co.uk/itm/MOTO-GUZZ...0/264738324285

Alternatively, if you can find a KTM with a similar PS15 or 16 reservoir, you might be able to buy just the boot from them as KTM don't seem to have a problem selling Brembo service parts.

I've since found what purports to be a 16mm repair kit at the place I linked to earlier:

https://addictionmotorsport.co.uk/br...-kit-110377310

But, if you check the part no. that they quote (110377310), other suppliers, such as Ducati Kämna describe it as being 15mm

https://www.ducati-kaemna.com/dichts...remspumpe.html

I've also read that the 16mm is actually 15.8mm (5/8") and that the 15mm kit is the one to use.

Mdina Italia seem to confirm the dimensions, if not the fitment.

https://www.mdinaitalia.co.uk/066139739.html

But, if you check the schematics for both PS15 and PS16 masters, they clearly show 15mm and 16mm respectively, which doesn't help much.