Quote:
Originally Posted by Billbo
Thanks chaps. I think I’ll try the macflurry route for cost effectiveness. Is there a how to somewhere and will I need to buy a tiny fuel vessel?
|
If you look at your inlet manifolds there may be a metal connector screwed into the side of each one. One of them should be hooked up to your fuel pump and the other may have a rubber cap over it, or you may just have a bolt in one of the holes.
Here's the part number for the metal connectors and the washer for them.
000075360 UNION
025070050 ALUMINIUM GASKET
You'll see them on the fuel pump part of the parts catalogue:
https://shop.oemducati.com/en/produc...-004462-009914
You connect each of the dials to these two points.
I just noticed that the dials in the link I originally posted come with the little plastic thumb screw connectors, they just faded into the background colour when I looked at the pic quick. So you can ignore the link I posted to those ones from China. I also ran mine using the fuel from the tank as it was still hooked up so no fuel vessel required.
Here's a decent giude on
www.ducatisuite.com