UK Monster Owners Club Forum - View Single Post - Carb balancer

Zimbo · 20-10-2018, 08:11 AM

I have an old set of Morgan Carbtunes but find they are getting a bit "sticky" so I don't have much confidence in them now.
Have been using a pair of dials which work well enough, once the carbs are in balance according to the dials I swap them over to the opposite cylinders and re-test, just to have confidence that the dials are in balance.
A friend uses a single dial to a T-piece going to both cylinders and then clamps the two pipes to the cylinders one at a time, if the dial reads the same for both cylinders then the carbs are in balance ...

20-10-2018, 08:11 AM	#7
Zimbo Too much time on my hands member Join Date: Apr 2003 Location: Stonehouse, Glos Bike: Multiple Monsters Posts: 2,078	I have an old set of Morgan Carbtunes but find they are getting a bit "sticky" so I don't have much confidence in them now. Have been using a pair of dials which work well enough, once the carbs are in balance according to the dials I swap them over to the opposite cylinders and re-test, just to have confidence that the dials are in balance. A friend uses a single dial to a T-piece going to both cylinders and then clamps the two pipes to the cylinders one at a time, if the dial reads the same for both cylinders then the carbs are in balance ...