View Single Post
Old 10-06-2020, 08:23 AM   #12
Ron1000
Registered User
 
Ron1000's Avatar
 
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 863
Had my evo from 1745 miles up to it’s present 18500 miles. Belts every two years and valves every 7500 miles. Although I’m going to miss my 22500 Miles valve service this year due to lack of miles caused by coronavirus, so it’ll be just the belts or get the guy to do The valves early. Dunno.

As for starting, I’m always confident mines will start. Sometimes it’s a bit reluctant sometimes it’s first hit of the button. Doesn’t seem to be any correlation to cold/low batt/hot or anything it just does what it does.

I did go through a phase of it resetting itself when I hit the starter button for awhile and throwing up an error code. But it would always reset fine and start only bug bear is it would turn the traction control off.

I did pull the boot back on the starter motor cable and ACF50 it then copper grease it. I thought it would do nothing, but since then I’ve not had the reset issue. Might be a coincidence.
Ron1000 is offline   Reply With Quote